Harbor Freight Tools 94696 Product manual
ADJUSTABLE TOW BAR
5,000 LB. CAPACITY
Model
94696
ASSEMBLY AND OPERATING INSTRUCTIONS
WARNING!
IMPORTANT INFORMATION
This Tow Bar’s Hitch Coupler MUST be properly
secured to the hitch ball of the towing vehicle.
After assembly and attachment, pull up and
down on the Hitch Coupler to make sure the
hitch ball is tting snugly in the Hitch Coupler.
There must be no play between the hitch ball
and Hitch Coupler. If there is play, tighten the
Adjustment Nut until no play is present. If the
Adjustment Nut is too tight, the Handle will not
lock. Carefully read and follow the complete
instructions in this manual BEFORE setup
or use.
If the Coupler is not secured properly, the
ball could come loose while the trailer is in
motion, possibly causing property damage,
SERIOUS PERSONAL INJURY, or DEATH.
Please note: Most vehicles will require custom brackets. For front towing of some
vehicles, the vehicle’s bumper will have to be removed rst. If not experienced
in setting up this type of equipment and installing brackets, assistance from a
qualied service technician is recommended.
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10e
CAN BE MODIFIED TO FIT MOST VEHICLES WITH MOUNTING BRACKET ASSEMBLY (Not Included) AS SHOWN IN LIGHT SHADED GRAY.
Adjustable Tow Bar is designed as a bolt-on mount only. A mounting bracket assembly (not included) needs to be 1.
connected to your vehicle’s frame or chassis and must extend beyond the bumper to install the Adjustable Tow Bar.
Under no circumstances should the Adjustable Tow Bar be welded to the vehicle nor should any of the mounting 2.
holes be altered. Must be mounted to vehicle by a qualied auto technician.
Includes two quick disconnect pull pins and 2” coupler for easy
connection and disconnection from Mounting Bracket Assembly.
Arms open from 24” to 43”
Folds for easy storage
Gloss black enamel nish
Chain sold separately.
Assembly hardware included.
Overall dimensions: 40-3/8” L x 11-1/2”
Shipping weight: 31.06 lbs.
After-market Mounting Bracket Assembly shown in light shaded gray is not included.
NOTICE
Included
Bracket
Included bracket can be bolted directly
to frame or bumper of some vehicles.
Drilling of holes is required.
REV 10b
Page 2SKU 94696 For technical questions, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
ITEM DESCRIPTION
Maximum Towing Capacity 5,000 lbs.
Coupler Ball Capacity 2”
Mounting Width Capacity 24” to 43”
Overall Dimensions 40-3/8” Long x 11-1/2” Wide
Unit Weight 29.20 lbs.
Independently tested to comply with SAE J684 and V5 standards.
Note: Four (4) sets of safety chains are required but not included with Kit. SKU 92450
Frame Chain, 3/8” - 5’ Length (4 sets required) can be used with this Adjustable Tow
Bar. This sku is sold separately at Harbor Freight Tools.
UNPACKING
When unpacking, make sure all the parts and hardware shown on the Parts List on page
11 are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front cover.
Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
Read and adhere to the following instructions. Failure to read and obey all of
the following instructions COMPLETELY will void the warranty and can result in
damage to the Tow Bar, property damage, or SERIOUS PERSONAL INJURY.
SAVE THESE INSTRUCTIONS.
WORK AREA
1. Keep work area clean and dry. Cluttered, damp, or wet work areas invite
injuries.
2. Keep children away from work area. Do not allow children to play with or climb
on this product.
REV 07a; 07b; 09h
Page 3SKU 94696 For technical questions, please call 1-800-444-3353.
3. Store idle equipment. When not in use, tools and equipment should be stored
in a dry location to inhibit rust. Always lock up tools and equipment, and keep out
of reach of children.
4. Do not use this product if under the inuence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgement or reexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.
5. Use eye protection. Wear ANSI approved safety impact eye goggles
when assembling this product. ANSI approved safety impact eye goggles are available from Harbor Freight Tools.
6. Dress safely. Do not wear loose clothing or jewelry, as they can become caught
in moving parts. Wear a protective hair covering to prevent long hair from
becoming caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up
above elbows.
7. Do not overreach. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etc.
8. Industrial applications must follow OSHA requirements.
9. Stay alert. Watch what you are doing at all times. Use common sense. Do not
use this product when you are tired or distracted from the job at hand.
EQUIPMENT USE AND CARE
1. Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the operation of this product. Replace
or repair damaged or worn parts immediately.
2. Replacement parts and accessories: When servicing, use only identical replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools.
3. Maintain this product with care. Keep this product clean and dry for better and
safer performance.
4. Maintenance: For your safety, service and maintenance should be performed
regularly by a qualied technician.
5. Use the right equipment for the job. Do not attempt to force small equipment
Page 4SKU 94696 For technical questions, please call 1-800-444-3353.
Loading...