Harbor Freight Tools 94582 User Manual

®

TOOL CHEST

AND ROLLER CABINET

94582

ASSEMBLY & OPERATING INSTRUCTIONS

Due to continuing improvement, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

Copyright© 2006 by Harbor F reight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please
complete the owner’s record below:

Model______________ Serial No._____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly .

Tec hnical Specifications

Materials: 25 gauge steel with steel latches and low carbon steel

hardware and drawer handles.
Overall Dimensions: 11-1/2” D X 19-3/4” W X 35-3/4” H
Ground Clearance: 2-1/4” H
Cabinet Dimensions: 11-1/2” D X 17-7/8” W X 22-13/16” H
Weight Capacity: Drawer-11 Lbs., Shelf-22 Lbs., Bottom-22 Lbs., Total=114 Lbs.
Includes: Locking drawers, four heavy duty casters and side extension

cord rack.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Chec k for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.

3. Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.

4. Always check hardware and assembled parts after assembling. All connections should be
tight and hardware tightened.

5. Keep children away. Children must never play on or climb on the Tool Chest and Roller
Cabinet.

6. Dress properly. Gloves are recommended when assembling the Tool Chest and Roller
Cabinet. Wear restrictive hair covering to contain long hair.

7. Use eye protection. Always wear ANSI approved impact safety goggles when assembling
this product.

8. Maintain product with care. Keep the Tool Chest and Roller Cabinet in a dry location.

9. Use the right Tool Chest and Roller Cabinet for the situation. There are certain
applications for which this Chest and Cabinet was designed. Do not modify this product and do
not use this product for a purpose for which it was not intended.

REV 09/06

SKU 94582 For technical questions please call 1-800-444-3353. Page 2