Harbor Freight Tools 94241 User Manual

®

HOT HOUSE

MINI GREENHOUSE

94241

ASSEMBLY & OPERATING INSTRUCTIONS

Use only with GFCI electrical outlet

Due to continuing improvement, actual product may differ slightly from product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please

complete the owner’s record below:

Model______________ Serial No.____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.

Tec hnical Specifications

Material: (1) Polyester Nylon heating mat
Tray Dimensions: 21-3/4” Long X 11-3/4” Wide X 2-1/8” High
Seed Inserts: 1-3/4” squares, 2” deep (10 X 5 Rows=50)
Dome Lid Dimensions: 22-1/8” Long X 12” W X 5” Deep
Mat Dimensions: 19-3/4” L X 9-1/8” W X .177” Thick; stitching = 7 per inch
Cord Length: 66” L

Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

WORK AREA

1. Keep your work area clean and well lit. Cluttered benches and dark areas invite

accidents.

2. Do not operate the Hot House in explosive atmospheres, such as in the presence of

flammable liquids, gases, or dust. Electrical products create sparks which may ignite the
dust or fumes.

ELECTRICAL SAFETY

3. Grounded products must be plugged into an outlet properly installed and grounded in

accordance with all codes and ordinances. Never remove the grounding prong or
modify the plug in any way. Do not use any adapter plugs. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded. If a

grounded product should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user.

4. Double insulated products are equipped with a polarized plug (one blade is wider

than the other). This plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug in any way.

Double insulation

eliminates the need for the three wire grounded power cord and

grounded power supply system.

SKU 94241 For technical questions please call 1-800-444-3353. Page 2

5. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and

refrigerators. There is an increased risk of electric shock if your body is grounded.

6. Do not abuse the Power Cord. Never use the Power Cord to carry the Hot House or

pull the Plug from an outlet. Keep the Power Cord away from heat, oil, and sharp
edges. Replace damaged Power Cords immediately. Damaged Power Cords increase

the risk of electric shock.

7. When operating a power tool outside, use an outdoor extension cord marked “W-A”

or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric
shock.

PERSONAL SAFETY

8. Stay alert. Watch what you are doing, and use common sense when operating the

Hot House. Do not operate the Hot House while tired or under the influence of drugs,
alcohol, or medication.

9. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.

10. Use safety equipment. Always wear eye protection during assembly and

maintenance.

11. WARNING! People with pacemakers should consult their physician(s) before using

this product. Operation of electrical equipment in close proximity to a heart pace
maker could cause interference or failure of the pacemaker .

TOOL USE AND CARE

12. Do not overload the Hot House. Use the correct Hot House for your application.

13. Disconnect the Power Cord Plug from the power source before inserting seeds,

making any adjustments, watering, or storing the Hot House. Such
preventive safety measures reduce the risk of turning on the product accidentally.

14. Store idle products out of reach of children and other untrained persons.

15. Maintain the Hot House with care. Do not use a damaged Hot House . Tag damaged

Hot House “Do not use” until repaired.

SERVICE

16. When servicing the Hot House, use only identical replacement parts. Use of

unauthorized parts or failure to follow maintenance instructions may create a risk of electric
shock or injury.

17. Always unplug the Hot House from its electrical outlet before performing any

watering, inspection maintenance, planting or cleaning procedures.

SKU 94241 For technical questions please call 1-800-444-3353. Page 3