Harbor Freight Tools 94050 Owner's Manual

®

REVOLVING BINS WITH

12” DIAMETER TRAYS

94050

ASSEMBLY & OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

Copyright© 2005 by Harbor F reight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please

complete the owner’s record below:

Model______________ Serial No._____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE y ou begin assembly.

Technical Specifications

Bins: Ball Bearing revolving bins
T r ay Diameters: 11-3/4” diameter x 1” deep
Dividers: 5-1/2” L x 3” H x 1/64” Thick
2 Bottom Trays: Three Divider Trays
2 Top Trays: Six Divider T r a ys
Maximum Weight: 7-1/2 Lbs. each Tray (evenly distributed); 30 Lbs. total
Weight: 6.4 Lbs.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Keep work area well lighted.

3. Store idle equipment. When not in use, the Revolving Bins must be stored in a safe and dry
location to inhibit rust. Always lock up products and keep out of reach of children.

4.

Use the right product for the job. There are certain applications for which the Revolving Bins
were designed. Do not modify the Revolving Bins and do not use this product for a purpose for
which it was not intended.

5. Check for damaged parts. Bef ore using any product, an y part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function. Check
for any brok en or damaged parts and any other conditions that may affect its operation. Replace
or repair damaged or worn parts immediately.

6. Replacement parts and accessories. When servicing, use only identical replacement par ts.
Use of any other parts will void the warranty.

7. Do not operate product if under the influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is
any doubt, do not operate the product.

8. Use eye protection. Always wear ANSI approved impact safety goggles during assembly.

9. Do not allow children to handle or play with the Revolving Bins. Caution: Small parts

stored in the Bins can be easily swallowed by children.

SKU 94050 For technical questions please call 1-800-444-3353. Page 2