Harbor Freight Tools 93897 Product manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Retractable Hose Reel With 50ft Air Hose

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

ITEM 93897

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

SAFETY OPERATION MAINTENANCESETUP

Indicates a hazardous situation which, if not avoided,

Addresses practices not related to personal injury.

will result in death or serious injury.

could result in death or serious injury.

could result in minor or moderate injury.

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

WARNING – When using tools, basic precautions should always be followed, including the following:

To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool.

Work Area

1. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons.

2. Keep bystanders, children, and visitors away while operating the tool. Distractions are able to result in the loss of control of the tool.

Personal Safety

1. Stay alert. Watch what you are doing and

use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication.

A moment of inattention while operating the tool increases the risk of injury to persons.

2. Dress properly. Do not wear loose

clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long

hair increases the risk of injury to persons as a result of being caught in moving parts.

3. Do not overreach.

Keep proper footing and balance at all times.

Proper footing and balance enables better control of the tool in unexpected situations.

4. Use safety equipment.

A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions.

5. Always wear eye protection.

Wear ANSI-approved safety goggles.

Tool Use and Care

1. Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed.

Page 2 For technical questions, please call 1-800-444-3353. Item 93897

2. Disconnect the tool from the air source

before making any adjustments, changing accessories, or storing the tool. Such

preventive safety measures reduce the risk of starting the tool unintentionally.

Tool Use and Care (cont.)

3. Store the tool when it is idle out of reach of children and other untrained persons.

A tool is dangerous in the hands of untrained users.

4. Check for misalignment or binding of moving

parts, breakage of parts, and any other condition that affects the tool's operation. If damaged,

have the tool serviced before using. Many accidents are caused by poorly maintained tools. There is a risk of bursting if the tool is damaged.

Service

1. Tool service must be performed only by qualified repair personnel.

2. When servicing a tool, use only identical replacement parts. Use only authorized parts.

Air Source

1. Never connect to an air source that is

capable of exceeding 200 psi.

Over pressurizing the tool may cause bursting, abnormal operation, breakage

of the tool or serious injury to persons. Use only clean, dry, regulated compressed air at the rated pressure or within the rated pressure range as marked on the tool. Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range.

5. Use only accessories that are identified by the manufacturer for the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons.

SAFETYOPERATIONMAINTENANCE SETUP

3. Use only the lubricants supplied with the tool or specified by the manufacturer.

2. Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source for the tool. Such gases are capable of

explosion and serious injury to persons.

Safety Symbol Definitions

Symbol Property or statement

PSI

NPT

Pounds per square inch of pressure

National pipe thread, tapered

WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved eye protection.

Specific Safety Instructions

1. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

2. Obey the manual for the air tool and air compressor used with this tool.

Symbol Property or statement

WARNING marking concerning Risk of Respiratory Injury. Wear NIOSH-approved dust mask/respirator.

WARNING marking concerning Risk of Explosion.

3. Install an in-line shutoff valve to allow immediate control over the air supply in an emergency, even if a hose is ruptured.

4. WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.)

SAVE THESE INSTRUCTIONS.

Page 3For technical questions, please call 1-800-444-3353.Item 93897

+ 5 hidden pages