Harbor Freight Tools 93819 User Manual 2

SUBMERSIBLE DIRTY WATER PUMP

Model 93819 - 1 HP

Model 93820 - 1.2 HP

ASSEMBLY AND OPERATING INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

manual or any artwork contained herein may be reproduced in any shape or form

For technical questions, please call 1-800-444-3353.

without the express written consent of Harbor Freight Tools.

PRODUCT SPECIFICATIONS

Item Description

Electrical Requirements

(Model 93819)

Electrical Requirements

(Model 93820)

Self-Priming Yes Yes

Maximum Size Particle Uptake

Maximum Pressure Maximum Capacity

Maximum Delivery Height

Maximum Submersion Depth 26 Feet 28 Feet

Discharg e Diam eter

Minimum Uptake Depth 4” 4”

Maximum Operating

Temperature

Net Weight

120 VAC / 60 Hz / 750 Watts / 6 AMP / 1 HP Motor Power Cord Plug Type: 3-Prong, Grounded Power Cord Type: 18 Ft. Long / 18AWG x 3C Thermal Overload Protection: Yes Switch Type: Automatic ON/OFF Float Switch

120 VAC / 60 Hz / 900 Watts / 7 AMP / 1.2 HP Motor Power Cord Plug Type: 3-Prong, Grounded Power Cord Type: 18 Ft. Long / 18AWG x 3C Thermal Overload Protection: Yes Switch Type: Automatic ON/OFF Float Switch

Model 93819 Model 93820

0.196” 0.196”

14.5 PSI/1.0 bar 16 PSI/1.1 bar

3400 Gal. Per Hour/56 Gal. Per Min. 3700 Gal. Per Hour/61 Gal. Per Min.

26 Feet 28 Feet

1-1/2” 1-1/2”

95° F 95° F

11.4 Pounds 12.2 Pounds

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1. Keep your work area clean and well lit. Cluttered benches and dark areas

SKU 93819 For technical questions, please call 1-800-444-3353 PAGE 2

93820

invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

4. Grounded tools must be plugged into a GFCI (Ground Fault Circuit Interrupter) outlet, properly installed, and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.

If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.

5. Double insulated tools are equipped with a polarized plug (one blade is

wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the

three wire grounded power cord and grounded power supply system.

6. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

7. Do not abuse the Power Cord. Never use the Power Cord to carry the tools

or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock.

PERSONAL SAFETY

8. Stay alert. Watch what you are doing, and use common sense when operating this product. Do not use the Fountain while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operat-

ing this product may result in serious personal injury.

SKU 93819 For technical questions, please call 1-800-444-3353 PAGE 3

93820

9. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

10. Use safety equipment. Wear ANSI approved safety impact goggles when assembling this product. Non-skid safety shoes must be used for appropriate conditions.

TOOL USE AND CARE

11. Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the Pump. Such preven-

tive safety measures reduce the risk of starting the unit accidentally.

12. Store idle equipment out of reach of children and other untrained persons. Electrically powered products are dangerous in the hands of untrained users.

13. Check for misalignment or binding of moving parts, breakage of parts, and

any other condition that may affect this product’s operation. If damaged, have the Fountain serviced before using. Many accidents are caused by

poorly maintained equipment.

SERVICE

14. Service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

15. When servicing this product, use only identical replacement parts. Follow

instructions in the

“Inspection, Maintenance, And Cleaning”

section of this

manual. Use of unauthorized parts or failure to follow maintenance instructions

may create a risk of electric shock or injury.

SPECIFIC SAFETY RULES

1. Maintain labels and nameplates on the Pump. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

2. Wear ANSI approved safety impact eye goggles when assembling

the Pump. Using personal safety devices reduce the risk for injury. Safety impact eye goggles are available from Harbor Freight Tools.

93819 For technical questions, please call 1-800-444-3353 PAGE 4

SKU

93820

+ 9 hidden pages