Harbor Freight Tools 93532 User Manual
HIGH VELOCITY 24” FLOOR FAN
Model
93532(FE-60D3fOL)
SET UP AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09b, 09l
PRODUCT SPECIFICATIONS
Fan Blade 24”
Fan Guard Diameter 24-1/4”
Air Delivery 7,200 CFM
Motor 120 V~, Single Phase Continuous Duty
Amperage High -1.85, Low - 1.45
E186832
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND SAVE THESE INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, re, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit.1. Cluttered benches and dark areas invite
accidents.
Do not operate the fan in explosive atmospheres, such as in the presence of 2.
ammable liquids, gases, or dust. Fans may create sparks which may ignite the
dust or fumes. Do not use this Fan to ventilate ammable gas, dust, or mist.
Keep children away while operating the Fan. 3. Children may insert ngers or
other objects through the guard, resulting in severe personal injury.
ELECTRICAL SAFETY
Grounded fans must be plugged into an outlet properly installed and ground-1.
ed in accordance with all codes and ordinances. Never remove the ground-
ing prong or modify the plug in any way. Do not use any adapter plugs.
Check with a qualied electrician if you are in doubt as to whether the outlet
is properly grounded. If the fan should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the user.
REV 09l
SKU 93532 For technical questions, please call 1-800-444-3353. Page 2
WARNING: To reduce the risk of re or electric shock, do not use this fan 2.
with any solid state speed control device.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, 3.
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
WARNING: To reduce the risk of re or electric shock, do not expose this fan 4.
to water or rain.
Do not abuse the Power Cord.5. Never use the Power Cord to carry the fan or
pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp
edges, or moving parts. Replace damaged Power Cords immediately. Dam-
aged Power Cords increase the risk of electric shock.
PERSONAL SAFETY
Be sure the fan is on a stable, at surface when in operation.1.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. 2.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Avoid accidental starting.3. Be sure the Power Switch is off before plugging
in.
FAN USE AND CARE
Do not use the Fan if the Power Switch does not turn it on or off.1.
Disconnect the Power Cord Plug from the power source before making any 2.
adjustments, changing accessories, or storing the fan. Such preventive safety
measures reduce the risk of starting the fan accidentally.
Store the fan out of reach of children and other untrained persons. 3. Fans are
dangerous in the hands of untrained users.
Check for misalignment or binding of moving parts, breakage of parts, and 4.
any other condition that may affect the fan’s operation. If damaged, have the
fan serviced before using.
SERVICE
Fan service must be performed only by qualied repair personnel. 1. Service
or maintenance performed by unqualied personnel could result in a risk of injury.
If the Blade Guard is removed for service, it must be replaced before resuming
operation.
SKU 93532 For technical questions, please call 1-800-444-3353. Page 3
Loading...