Harbor Freight Tools 93506 Product manual

QUICK CHANGE AIR BRUSH KIT

®

Model 93506

ASSEMBLY and OPERATING INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Copyright © 2005 by Harbor Freight Tools® . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Specifications

Fluid Capacity 3/4 oz.
Air Inlet 1/4” NPT
Working Pressure 15 to 50 PSI
Fluid Jar Size (Qty. 5) 1-3/8” Dia. x 2” H
Air Brush Dimensions 5-1/2” x 1-3/8” x 3-3/4”

Note: This Air Brush works with a regulated small air compressor with an air regulator (none

included). The air pressure must not exceed 50 PSI.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instruc­tions, operating and maintenance procedures, parts list and diagram. Keep your in­voice with this manual. Write the invoice number on the inside of the front cover. Keep
the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Don’t expose to rain. Keep work area well lit. Do
not use a propellant can in the presence of flammable gases or liquids. Always
spray in a well ventilated area.

3. Keep children and bystanders away. Children must never be allowed in the work
area. Do not let them handle machines, tools, extension cords, or air hoses.

4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.

5. Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for
which it was intended. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.

6. Use eye and nose protection. Wear, and ensure all people in the work area
wear, ANSI approved impact safety goggles and an ANSI approved dust mask or
respirator.

7. Maintain tools with care. Keep Air Brush clean for better and safer performance.
Follow instructions for changing accessories.

8. Do not overreach. Keep proper footing and balance at all times.

Page 2SKU 93506 For technical questions, please call 1-800-444-3353

9. Stay alert. Watch what you are doing, use common sense. Do not operate any
tool when you are tired.

10. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment and binding of moving parts; any
broken parts or mounting fixtures; and any other condition that may affect proper
operation. Any part that is damaged should be properly repaired or replaced by a
qualified technician.

11. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are available
from Harbor Freight Tools.

12. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels if taking prescription medicine to determine if your judgement or reflexes
are impaired while taking drugs. If there is any doubt, do not operate the Air
Brush.

13. Maintenance. For your safety, maintenance should be performed regularly by a
qualified technician.

14. Use compressed air from a small, regulated air compressor. Use clean, dry
regulated air at 15 to 50 PSI. Never use oxygen, carbon dioxide, combustible
gases, or any other bottled gas as a power source for this tool.

Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under­stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.

WARNING: The brass components of this product contain lead, a chemical known

to the State of California to cause birth defects (or other reproductive harm).
(California Health & Safety code 25249.5, et seq.)

Unpacking

When unpacking, check to make sure the parts listed on page 6 are included. If any
parts are missing or broken, please call Harbor Freight Tools at the number on the
cover of this manual as soon as possible.

Page 3SKU 93506 For technical questions, please call 1-800-444-3353