Harbor Freight Tools 93442 User Manual

CASCADING FOUNTAIN

Model 93442

ASSEMBLY AND OPERATING INSTRUCTIONS

Diagrams within this manual may not be drawn proportionally.

Due to continuing improvements, actual product may differ slightly from the product described herein.

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury. SAVE THIS MANUAL.

Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

PRODUCT SPECIFICATIONS

Item Description

Electrical Requirements 120 VAC / 60Hz / 0.04 AMPs

Power Cord: 6’-3” / 18AWG x 3 C Power Plug: 3-Prong

Water Pump Self-Priming with Intake Filter / 1/4” Outlet Nipple

Large Bowl Size 13-1/4” Diameter x 4-1/2” High

Small Bowl Size 6-1/4” Diameter x 2-7/8” High

Jug Size 4-7/8” Diameter x 6” High

Stand Frame Dimensions 11” Diameter x 16-3/4” High

Overall Dimensions 15-5/8” Long x 17” Wide x 21-1/2” High

Unit Weight 16.25 Pounds

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, ﬁre, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2. Do not operate this product in explosive atmospheres, such as in the presence of ﬂammable liquids, gases, or dust. Electrically charged products create sparks which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away while operating a this product. Distractions can cause you to lose control. Protect others in the work area from

debris such as chips and sparks. Provide barriers or shields as needed.

ELECTRICAL SAFETY

4. Grounded products must be plugged into an outlet properly installed and

REV 09c

SKU 93442 For technical questions, please call 1-800-444-3353 PAGE 2

grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualiﬁed electrician if you are in doubt as to whether the outlet is properly grounded. If the product should electrically malfunction

or break down, grounding provides a low resistance path to carry electricity away from the user.

5. Double insulated products are equipped with a polarized plug (one blade is

wider than the other). This plug will ﬁt in a polarized outlet only one way. If the plug does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the

three wire grounded power cord and grounded power supply system.

6. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

7. Do not abuse the Power Cord. Never use the Power Cord to carry this

product or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock.

8. When operating this product outside, use an outdoor extension cord marked “W-A” or “W”. These extension cords are rated for outdoor use, and

reduce the risk of electric shock.

PERSONAL SAFETY

9. Stay alert. Watch what you are doing, and use common sense when

operating this product. Do not use the Fountain while tired or under the inﬂuence of drugs, alcohol, or medication. A moment of inattention while

operating this product may result in serious personal injury.

10. Avoid accidental starting. Make sure the Power Cord remains unplugged from its electrical outlet until this product is completely assembled, ﬁlled with water, and ready to use.

11. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of this product in unexpected situations.

SKU 93442 For technical questions, please call 1-800-444-3353 PAGE 3

12. Use safety equipment. Wear eye protection when assembling this product. Non-skid safety shoes must be used for appropriate conditions.

TOOL USE AND CARE

13. Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the Fountain. Such

preventive safety measures reduce the risk of starting the unit accidentally.

14. Store idle equipment out of reach of children and other untrained persons. Electrically powered products are dangerous in the hands of untrained users.

15. Check for misalignment or binding of moving parts, breakage of parts, and

any other condition that may affect this product’s operation. If damaged, have the Fountain serviced before using. Many accidents are caused by

poorly maintained equipment.

SERVICE

16. Service must be performed only by qualiﬁed repair personnel. Service or maintenance performed by unqualiﬁed personnel could result in a risk of injury.

17. When servicing this product, use only identical replacement parts. Follow

instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions

may create a risk of electric shock or injury.

SPECIFIC SAFETY RULES

1. Maintain labels and nameplates on the Fountain. Save this instruction manual. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

2. Wear ANSI approved safety impact eye goggles and heavy duty work gloves when assembling the Fountain. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy duty work gloves are available from Harbor Freight Tools.

SKU 93442 For technical questions, please call 1-800-444-3353 PAGE 4

3. Maintain a safe environment. Keep the area well lit. Make sure there is ade- quate surrounding space. Always keep the area free of obstructions, grease, oil, trash, and other debris. Do not use an electrically powered product in areas near ﬂammable chemicals, dusts, and vapors.

4. Never leave the Fountain unattended when it is plugged into an electrical

outlet. Turn off the Fountain before leaving.

5. Carefully inspect the condition of the Fountain before use, and check the

Fountain continually during use. If any damage is noted, stop immediately and repair or replace the Fountain.

6. Make sure the Pump (9) is unplugged from its electrical outlet prior to

performing any inspection, maintenance, or cleaning procedures.

7. CAUTION! Excessive weight or pressure on any of the Fountain sections

may cause it to tip and/or fall. Keep children and pets away from any of the Fountain sections and the Power Cord.

8. The ceramic Bowls (5, 6, 7) are fragile and can be easily damaged. Handle

with care.

9. This Fountain is designed for use with cold, clean water only. Do not use

water over 85 degrees Fahrenheit as it will damage the inner seals of the Pump (9) may occur. Do not use this Fountain with any other liquids.

10. Make sure the water supply used for the Fountain is not dirty, sandy, and

does not contain any corrosive chemical products. Change the water when necessary and rinse out the ceramic Bowls (5, 6, 7) frequently.

11. Running the Pump (9) without sufﬁcient water can damage the Pump. This

Pump requires a minimum of 2 inches of water at all times.

12. If locating the Fountain on a ground surface, make sure the surface is ﬂat,

level, and dry.

13. If locating the Fountain on a table, make sure the table is ﬂat, level, dry,

and sturdy enough to support the weight of the Fountain and its water. Always keep the Fountain out of reach of children.

14. Avoid accidental electric shock. Keep all electrically powered products

away from the Fountain. Disconnect the Pump (9) from its electrical outlet before placing hands in a ceramic Bowl (5, 6, 7) ﬁlled with water. Make sure to stand on a dry, insulated surface such as a rubber mat while using the Fountain.

SKU 93442 For technical questions, please call 1-800-444-3353 PAGE 5

+ 9 hidden pages