TRAILER
SPARE TIRE CARRIER
93341
ASSEMBLY & OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions and replacement parts please call 1-800-444-3353.
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the
owner’s record below:
Model______________ Serial No._____________ Purchase Date_______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual
to become familiar with the unit BEFORE you begin assembly.
The Trailer Spare Tire Carrier fits most trailer tongues up to 3” wide and 4” high. Will accept both 4 and 5 lug wheels.
Easily mounts the spare tire up and away from the trailer.
Technical Specifications
Construction: Heavy duty welded steel
Overall Dimensions: 10-1/4” L x 4” W x 6-1/4” H
Pre-drilled holes: 7/16” 360 degrees
Maximum Weight Capacity: 100 Lbs.
Weight: 6.6 Lbs.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Keep work area well lighted.
3. Store idle equipment. When not in use, the Spare Tire Carrier must be stored in a dry location to inhibit rust.
Always lock up products and keep out of reach of children.
4.
Use the right product for the job. There are certain applications for which the Trailer Spare Tire Carrier was
designed. Do not modify the Spare Tire Carrier and do not use this product for a purpose for which it was not
intended.
5. Check for damaged parts. Before using any product, any part that appears damaged should be carefully
checked to determine that it will operate properly and perform its intended function. Check for any broken or
damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn
parts immediately.
Note: Dents or other imperfections in the Spare Tire Carrier may lead to a weakening of the structural strength
of this product; do not use this Carrier if this type of damage is noted.
6. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any
other parts will void the warranty.
7. Do not operate product if under the influence of alcohol or drugs. Read warning labels on prescriptions
to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate
the product.
8. Use eye protection. Always wear ANSI approved impact safety goggles during assembly and when working
with tools and equipment.
9. The tire (not included) attached to this Carrier should be locked in place with nuts tightened to 90 ft-
lbs.
SKU 93341 For technical questions, please call 1-800-444-3353. Page 2