Harbor Freight Tools 93228, 93229 User Manual

®

4” RED FLUSH-MOUNT TAIL LIGHT

4” AMBER FLUSH-MOUNT TAIL LIGHT

93228
93229

ASSEMBLY & OPERATING INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No por tion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please

complete the owner’s record below:

Model

______________ Serial No.____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.

The Flush Mount Tail Light provides stop, turn and tail light functions.

Technical Specifications

Technical specifications are the same for both #93229 and #93228.
Model 93229 has a red tail light; model 93228 has an amber tail light.
Overall Dimensions: 5-1/2” diameter x 2-1/4” Deep
Lens: 4” diameter
Construction: Housing is white ABS and Lens is acrylic.
Bulb (included): One dual filament P21/5W 12V; 21-5W (1016);

12499 Phillips

®

bulb. Bulb has two pins that are offset.

Housing rotates 360 degrees.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Keep work area well lighted.

3. Store idle equipment. When not in use, the Tail Lights must be stored in a safe and clean
location. Always lock up products and keep out of reach of children.

4.

Use the right product for the job. There are certain applications for which the Flush Mount
Tail Light was designed. Do not modify the Tail Light and do not use the product for a purpose for
which it was not intended.

5. Check for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.

6. Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.

7. Do not operate product if under the influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there
is any doubt, do not operate the product.

8. Use eye protection. Always wear ANSI approved impact safety goggles.

SKU 93228 / 93229 For technical questions please call 1-800-444-3353. Page 2