Harbor Freight Tools 93227, 93226 Product manual

Specifications

Product Application Marker / Clearance Lamps

Overall Dimensions: 4-1/8” L x 2-1/16” W x 1” H

Housing: 4-1/8” L x 2-1/16” W x 5/8” H

Lens: 4” L x 2” W x 11/16” H.

Mounting Holes: 1/4” diameter and 3” apart at centers

Construction: White ABS Poly and lens is red/amber acrylic.

Light Bulb: 12VDC (2 included)

Important Safety Information

Assembly Precautions

1. Assemble only according to these
instructions. Improper assembly
can create hazards.

2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.

3. Keep assembly area clean and well lit.

4. Keep bystanders out of the
area during assembly.

5. Do not assemble when tired
or when under the influence of
alcohol, drugs or medication.

6. Replacement parts and accessories.
When servicing, use only identical
replacement parts. Use of any other
parts will void the warranty.

7. Always check hardware and assembled
parts after assembling. All connections
should be tight and hardware tightened.

8. Weight capacity and other product
capabilities apply to properly and
completely assembled product only.

Use Precautions

1. This product is not a toy. Do not allow
children to play with or near this item.

2. Use as intended only.

3. Inspect before every use; do not use
if parts are loose or damaged.

4. Use the right product for the job.
There are certain applications for
which the Lamp was designed.

5. Make certain to follow all local DMV

(Department of Motor Vehicles)
laws regarding vehicles and
vehicle lighting requirements.

6. Do not cut or rewire any
part of the Lamp.

7. Make certain the vehicle is turned
off before doing any maintenance.

8. The warnings, cautions, and instructions
discussed in this instruction manual
cannot cover all possible conditions
and situations that may occur. It must
be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.

9. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

Page 2 For technical questions, please call 1-888-866-5797. Item 93226, 93227