Harbor Freight Tools 93170 Product manual

®

TRUCK ANCHOR

FLUSH MOUNT 2 PCS.

93170

ASSEMBLY & OPERATING INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

Copyright© 2005 by Harbor F reight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please

complete the owner’s record below:

Model______________ Serial No._____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE y ou begin assembly.

Technical Specifications

Universal Fit Anchor System
Material: Chrome plated Steel
Dimensions: 3-7/16” L x 2-1/4” W x 1-3/4” H
Load Rating: 70 Lbs. Maximum Capacity At Each Anchor Point

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Keep work area well lighted.

3. Use the right product for the job. There are certain applications for which the Truck Anchor
was designed. Do not modify the Truck Anchor and do not use this product for a purpose for
which it was not intended.

4. Check for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.

5. Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.

6. Do not operate product if under the influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there
is any doubt, do not operate the product.

7. Use eye protection. Always wear ANSI approved impact safety goggles during assembly and
use.

8. Do not exceed the product’s maximum load rating of 70 Lbs.

Anchor Point.)

(Maximum Capacity At Each

SKU 93170 For technical questions please call 1-800-444-3353. Page 2