Harbor Freight Tools 93096 User Manual
POWER INVERTER AND CHARGER
500 WATT / 800 WATT PEAK
93096
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Specifications
METINOITPIRCSED
rewoPsuounitnoCsttaW005
rewoPkaePsttaW008
egatloVCD)elbissopstloV51-11(CDlanimoNstloV21
oVCAzH06taCAstloV021
egatl
selcatpeceRCAsteltuOdeziraloP,gnorP-3owT)2(
esuFretrevnIspmA03X2
esuFregrahCgnitca-tsaF
snoisnemiD8
1
/
4
3
9xL"
/
8
thgieWsbl4.7
srotacidnInorewop=DELneerG
setaRgnigrahCpmA01/5
erutarepmeTgnitarepOF°311-41
droCrewoPCA'01
taeF
seru
1
2
;V11ta
Save This Manual
,tloV052,spmA01
1
3xW"
/4H"
noitcetorpdaolrevohtiwevawenisdeifidoM-
1
mralaegatlovwoL-
V01tuobata
2
nwodtuhsdna
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this device, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Do not plug a battery charger into the Inverter if the charger has a warning
that dangerous voltages are present at the battery terminals.
2. Keep work area clean. Cluttered areas invite injuries.
3. Keep Inverter away from any direct heat source or combustible material.
4. Observe work area conditions. Do not use machines or powered products in
damp or wet locations. Don’t expose to rain. Keep work area well lit. Do not use
electrically powered products in the presence of flammable gases or liquids.
SKU 93096 Page 2For technical questions, please call 1-800-444-3353.
5. Keep children away. Children must never be allowed in the work area. Do not
let them handle machines, equipment, or extension cords.
6. Use the right inverter for the job. Do not attempt to force a small inverter or
attachment to do the work of a larger industrial inverter. There are certain applications for which this Inverter was designed. It will do the job better and more
safely at the rate for which it was intended. Do not modify this Inverter and do
not use this Inverter for a purpose for which it was not intended.
7. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain
long hair.
8. Always wear eye protection. When working around lead acid batteries, always
wear ANSI approved safety impact eye goggles, full face shield and work gloves.
When working under the vehicle’s hood, always be careful of hot engine parts.
9. Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
10. Maintain inverters with care. Keep inverters clean for better and safer perfor-
mance. Follow instructions for changing accessories. Inspect inverter cords
periodically and, if damaged, have them repaired by an authorized technician.
11. Disconnect power. Unplug inverter when not in use.
12. Avoid unintentional starting. Be sure the switch is in the Off position when
not in use and before plugging in any appliance.
13. Stay alert. Watch what you are doing, use common sense. Do not operate any
inverter when you are tired.
14. Check for damaged parts. Before using any inverter, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired or
replaced by a qualified technician. Do not use the inverter if any switch does not
turn On and Off properly.
15. Servicing. This device should be serviced only by a qualified technician. Aside
from the fuse, this item does not have any user-replaceable parts.
16. Do not operate inverter if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the inverter.
17. Read and adhere to all warnings and safety precautions in the owner’s
manual for the device or battery that this inverter is used to power.
SKU 93096 Page 3For technical questions, please call 1-800-444-3353.
Loading...