Harbor Freight Tools 93039 User Manual

®

DIESEL ENGINE COMPRESSION

TESTER SET

93039

OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www .harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Copyright© 2005 by Harbor Freight Tools® . All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight T ools.

For technical questions and replacement parts, please call 1-800-444-3353.

SPECIFICATIONS TABLE

metInoitpircseD

lairetaM,spiTdenedraH,leetSnobraC

esoHerusserPhgiH

hsiniF,eguaGdetalPemorhC

sretpadAcniZ/edixOkcalB

thgieWsdnuoP2.5

SAVE THIS MANUAL

Y ou will need this manual for the safety warnings and precautions, applications
instructions, inspection, maintenance, and c leaning procedures. Keep y our in voice
with this manual. Write the in voice number on the inside of the fr ont cover . Keep this
manual and inv oice in a saf e and dry place for future reference.

GENERAL SAFETY WARNINGS AND PRECAUTIONS

1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas invite

injuries.

2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle

this product.

3. STORE IDLE EQUIPMENT . When not in use, tools and equipment should be stored

in a dry location to inhibit rust. Always lock up tools and equipment and keep out of

reach of children.

4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR

DRUGS. Read warning labels on prescriptions to determine if your judgment or

reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use

this product.

5. USE EYE PRO TECTION. Wear ANSI approv ed safety impact goggles when using

this product.

6. DRESS SAFELY . Nonskid footwear or safety shoes should be used when working

with this product. Do not wear loose clothing or jewelry as they can become caught

in moving parts. Wear a protectiv e hair covering to prev ent long hair from becoming

caught in moving parts.

7. INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.

8. DO NOT OVERREACH. Keep proper footing and balance at all times to prevent

tripping, falling, back injury, etcetera.

9. STA Y ALER T. Watch what y ou are doing at all times. Use common sense. Do not

use this product when you are tired or distracted from the job at hand.

10. CHECK FOR DAMA GED PARTS. Bef ore using this product, carefully check that it

will operate properly and perform its intended function. Check for damaged parts

and any other conditions that may affect the operation of this product. Replace or

repair damaged or worn parts immediately.

Page 2SKU 93039 For technical questions, please call 1-800-444-3353.