Harbor Freight Tools 92708 User Manual

POWER INVERTER

400 WATT / 800 WATT PEAK

92708

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion
of this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

METINOITPIRCSED

rewoPsuounitnoCsttaW004

rewoPkaePsttaW008

egatloVtupnI)elbissopstloV51-11(CDlanimoNstloV21

eg

atloVtuptuOzH06taCAstloV021

selcatpeceRCAsteltuOdeziraloP,gnorP-3owT)2(

esuFspmA04

snoisnemiD-2xW"8/3-7xW"8/

thgieWsbl8.2

srotacidnInorewop=DELneerG

hctiwSffO/nO,epytrekcoR

erutarepmeTgnitarepOF°311-41

selbaCyrettaB)y

serutaeF

Specifications

1-5

1

1

2

;V11ta

mralaegatlovwoL-

V01tuobata

Save This Manual

3

/8H"

letamixorppa('2,GWA9

noitcetorpdaolrevohtiwevawenisdeifidoM-

2

nwodtuhsdna

You will need the manual for the safety warnings and precautions, assem­bly instructions, operating and maintenance procedures, parts list and diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep the manual and invoice in a safe and dry place for future refer­ence.

Safety Warnings and Precautions

WARNING: When using this device, basic safety precautions should always be

followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Do not plug a battery charger into the inverter if the charger has a warning
that dangerous voltages are present at the battery terminals.

2. Keep work area clean. Cluttered areas invite injuries.

3. Keep inverter away from any direct heat source or combustible material.

4. Observe work area conditions. Do not use machines or powered products
in damp or wet locations. Don’t expose to rain. Keep work area well lit. Do not

SKU 92708 Page 2For technical questions, please call 1-800-444-3353.

REV 04/05

use electrically powered products in the presence of flammable gases or liq­uids.

5. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, equipment, or extension cords.

6. Store idle equipment. When not in use, this product must be stored in a dry
location to inhibit rust.

7. Use the right inverter for the job. Do not attempt to force a small inverter or
attachment to do the work of a larger industrial inverter. There are certain
applications for which this inverter was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this inverter
and do not use this inverter for a purpose for which it was not intended.

8. Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically nonconductive clothes and nonskid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.

9. Use eye protection. Always wear ANSI approved impact safety goggles when
using inverters.

10. Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.

11. Maintain inverters with care. Keep inverters clean for better and safer per­formance. Follow instructions for changing accessories. Inspect inverter cords
periodically and, if damaged, have them repaired by an authorized technician.

12. Disconnect power. Unplug inverter when not in use.

13. Avoid unintentional starting. Be sure the switch is in the Off position when
not in use and before plugging in any appliance.

14. Stay alert. Watch what you are doing, use common sense. Do not operate
any inverter when you are tired.

15. Check for damaged parts. Before using any inverter, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired
or replaced by a qualified technician. Do not use the inverter if any switch does
not turn On and Off properly.

16. Servicing. This device should be serviced only by a qualified technician. Aside
from the fuse, this item does not have any user-replaceable parts.

SKU 92708 Page 3For technical questions, please call 1-800-444-3353.