Harbor Freight Tools 92688 User Manual

BATTERY CUT-OFF SWITCH

92688

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www .harborfreight.com

Copyright© 2005 by Harbor F reight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Specifications

Capacity @ 12 Volts: 100 Amps / 1000 Amps Surge
Capacity @ 24 Volts: 50 Amps / 500 Amps Surge

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using pr oduct, basic safety precautions should alwa ys be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use in damp or wet locations. Don’t expose
to rain. Keep work area well lit.

3. Keep children aw ay. Children must never be allowed in the work area. Do not let
them handle the Battery Cut-Off Switch.

4. Store idle equipment. When not in use, the Battery Cut-Off Switch must be stored in
a dry location to inhibit rust. Always lock up the Battery Cut-Off Switch and keep out
of reach of children.

5. Use the right product for the job. Do not attempt to force a small product to do the
work of a larger industrial product. There are certain applications for which this
product was designed. It will do the job better and more safely at the rate for which it
was intended. Do not modify this product and do not use this product for a purpose for
which it was not intended.

6. Dress properly. Do not wear loose clothing or je welry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.

7. Use eye protection. Alwa ys w ear ANSI approved impact safety goggles.

8. Do not overreach. Keep proper footing and balance at all times.

9. Maintain products with care. Keep the Battery Cut-Off Switch clean for better and
safer performance. The Keys must be kept clean, dry, and free from oil and grease at
all times.

Page 2SKU 92688 For technical questions, please call 1-800-444-3353