Harbor Freight Tools 92553 Product manual
2 PIECE #4 JACK
AND MINI PLANE SET
92553
ASSEMBLY INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our W eb site at http://www.harborfreight.com
®
Copyright © 2005 by Harbor Freight Tools
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
.
All rights reserved. No portion of this
Specifications
#4 Jack Plane
Mini Block Plane
Cast Iron Body, Cast Iron Frog with Steel Blade, Wood Handle and Knob, 2”
Wide Blade @ 25 Degrees
Stamped Steel Body with Poly Adjustment Knob and Steel Blade, 1.3” Wide
Blade @ 25 Degrees
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep the manual and invoice in a safe and dry place for future
reference.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use tools in damp or wet locations.
Do not expose to rain. Keep work area well lighted.
3. Check for damaged parts. Before using any product, any part that
appears damaged should be carefully checked to determine that it will
perform its intended function. Check for any broken or damaged parts and
any other conditions that may affect its operation. Any part that is damaged
should be properly repaired or replaced by a qualified technician.
4. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
5. Keep children away. Children must never be allowed in the work area. Do
not let them handle tools.
6. Dress Properly. Do not wear loose clothing or jewelry as they can be
caught in moving parts. Protective, electrically nonconductive clothes and
non-skid footwear are recommended when working. Wear restrictive hair
covering to contain long hair.
SKU 92553 For technical questions, please call 1-800-444-3353. Page 2
7. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of children.
8, Use eye and hand protection. Always wear ANSI approved impact safety
goggles when setting up this product. Wear heavy duty work gloves when
working with this product.
9. Stay Alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
10. Use eye protection. Always wear ANSI approved impact safety goggles.
Wear a full face shield if you are production metal filings or wood chips.
Wear an ANSI approved dust mask or respirator when working around
metal, wood, and chemical dusts and mists.
11. Maintain products with care. Keep tools sharp and clean for better and
safer performance. Follow instructions for lubricating and changing
accessories. The handle must be kept clean, dry, and free from oil and
grease at all times.
12. Take Caution as some woods contain preservatives such as copper
chromium arsenate (CCA) which can be toxic. When working with this
type of wood, extra care should be taken to avoid inhalation and minimize
skin contact.
13. Do not overreach. Keep proper footing and balance at all times.
14. Do not operate any tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgement or reflexes
are impaired while taking drugs. If there is any doubt, do not use this tool.
15. Maintenance. During periods of storage, coat the bare metal surfaces with
light oil to inhibit rust.
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by
the operator.
Unpacking
When unpacking this set, check to make sure that all parts are included as
shown in the parts list. If any parts are missing or broken, please call
Harbor Freight Tools at the number below.
Warning! Do not let the blade come into contact with your hands while planing or
changing the blade. The blade is extremely sharp and can cause severe injury.
SKU 92553 For technical questions, please call 1-800-444-3353. Page 3
Loading...