Harbor Freight Tools 92437 Product manual
6” DIAL FRACTIONAL CALIPER
Model
92437
SET UP AND OPERATING INSTRUCTIONS
Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly
and service may not be included.
Revised Manual 10h
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
For technical questions or replacement parts, please call 1-800-444-3353.
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number
in the back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
IMPORTANT SAFETY INFORMATION
In this manual, on the labeling, and all other information
provided with this product:
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER
WARNING
CAUTION
Notice
CAUTION
DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
CAUTION, used with the safety alert
symbol, indicates a hazardous situation
which, if not avoided, could result in minor
or moderate injury.
NOTICE is used to address practices not
related to personal injury.
CAUTION, without the safety alert symbol,
is used to address practices not related to
personal injury.
Page 2SKU 92437 For technical questions, please call 1-800-444-3353.
WARNING! Read all instructions
Failure to follow all instructions listed below may result in serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
Keep children and bystanders away while operating. Distractions can 1.
cause you to lose control.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.2.
PERSONAL SAFETY
Wear ANSI-approved safety goggles and heavy-duty work gloves during 1.
use and service.
Stay alert and use common sense when operating. Do not use when tired or 2.
under the inuence of drugs, alcohol or medication.
Do not overreach. Keep proper footing and balance at all times. This enables 3.
better control in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing 4.
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
PRODUCT USE AND CARE
This Caliper is not a toy. Keep it out of reach of children.1.
Use the correct product for your application. The correct product will do the job 2.
better and safer at the rate for which it was designed. Do not modify Caliper or
use it for a purpose for which it is not intended.
Check for binding of moving parts, breakage of parts and any other condition that 3.
may affect the Caliper’s operation. If damaged, have the Caliper repaired and
calibrated before use.
Use the product and accessories etc., in accordance with these instructions and 4.
in the manner intended for the particular type of product, taking into account the
working conditions and the work to be performed. Use of the product for opera-
tions different from those intended could result in a hazardous situation.
Page 3SKU 92437 For technical questions, please call 1-800-444-3353.
Loading...