Harbor Freight Tools 92337, 92336 User Manual

GUM BALL MACHINE- 9

”

92336

GUM BALL MACHINE w/STAND

”

15

92337

ASSEMBLY INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our W eb site at http://www.harborfreight.com

®

Copyright © 2004 by Harbor Freight Tools
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

.

All rights reserved. No portion of this

Specifications for Gumball Machine - 9” SKU92336

Construction
Overall Dimensions
Gum Capacity
Dim. of Glass Globe
Weight

Heavy Duty Cast Metal with a Glass Globe-Non Toxic Paint, Red
9” H x 4” W
8 oz. Gumballs (not included)
4-1/2” H Dia. x 4-1/4” H

1.4 Lbs

Specifications for Gumball Machine w/Stand - 15” SKU92337

Construction
Stand
Stand Height
Gumball Overall Dim.
Gum Capacitiy
Dim. of Glass Globe
Weight

Heavy Duty Cast Metal with a Glass Globe-Non Toxic Paint, Red
Heavy Duty Cast Metal Antique Style -Non Toxic Paint, Black
23” H
27-1/2” H x 4” W
62 oz. Gumballs (not included)
7-1/2” H Dia. x 6-5/8” H

16.5 Lbs

Save This Manual

You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Locate in safe operating area. Position the Gumball Machine in an
unobstructed area. The 9” Machine fits w ell on a desk or shelf. The 15” Machine
fits well in a corner or out of the traffic area and must be located on a flat, lev el
floor surface.

3. Check for damaged parts. Before using any product, any part that appears
damaged should be carefully checked to determine that it will perform its
intended function. Check for any broken or damaged parts and any other
conditions that may affect its operation. Replace or repair damaged or worn
parts immediately.

4. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty.

5. Always check the assemb led parts after assembling. All connections should
be tight and hardware tightened.

SKU 92336-SKU92337 For technical questions, please call 1-800-444-3353. Page 2

6. Maintain products with care. Keep Gumballs filled in globe. Empty coins
out of lower portion when refilling to prevent over filling.

7. Children should be supervised. Letting a child operate the Gumball
Machine is fun for all but caution should be observed. Allowing the child to
dispense and chew more than one Gumball at one time could cause
choking. Coins could be swallowed. Both the 9” and the 15” Gumball
Machine on the Stand could be pulled over by the child, causing personal
injury. It is best to supervise the operation of the Gumball Machine. Make
sure children keep their hands clear of the dispensing area to avoid getting
hands or fingers caught. Harbor Freight Tools is not responsible for injuries
caused by this product.

8. Caution when refilling Gumballs. Avoid sharp edges on the inside of the
cast metal base when disassembling and assembling this product. Caution:
The Globe is made of glass. Set Carefully on the table or workbench and
avoid accidently hitting the glass or letting it roll off the counter.

Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur . It
must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.

Unpacking

When unpacking the Gumball Machine, check to make sure that all parts
are included as shown in the parts list. If any parts are missing or broken,
please call Harbor Freight Tools at the number below. Thoughly clean all
parts with anti-bacterial soap and water before using. Be sure to thoroughly

dry all parts before reassembling.

Operating Instructions

Filling Machine:

1. Works with all coins, pennies, nickels, dimes and quarters. Dispenses
Gumballs, Peanuts, Jelly Beans, and more. To add Gumballs or other small
objects to the Gumball Machine, you must first unscrew the Plug (1) at the
top and remove the Cap (2). Pour Gumballs (not included) slowly into the
Glass Globe (5). Reassemble the Cap (2) and Plug (1).

Plug (1)

Glass Globe (5)

Cap (2)

Figure 1

SKU 92336-SKU92337 For technical questions, please call 1-800-444-3353. Page 3

See Figure 1.

with Gumballs

Removal of Coins:

1. Remove the Plug (1), Cap (2), Nut (3), Retaining Ring (4), Glass Globe
(5), Gasket (6), Brush Plate (7), and Adjustable Wheel (8). Hold Body (9)
firmly and lift up. You should be able to reach the coins. After removing the
coins, carefully reassemble the above par ts in the reverse order.

See illustration on Page 6 and Figure 2.

Glass Globe (5)

Gasket (6)

Brush Plate (7)

Adjustable

Wheel (8)

Nut (3)
Retaining Ring (4)

Cap (2)

Body (9)

Figure 2

Varying the Amount of Gumballs to be Dispensed:

1. Loosen screws on the Adjustment Wheel (8). Adjust the size of the
opening to the desired amount of Gumballs to be dispensed. Tighten screws
and replace assembly.

See Figure 3.

Coin Slot

Face Plate of the

Coin Mechanism (10)

Handle

Figure 4

Figure 3

Operating the Machine:

1. Place the coin into the slot

(See Figure 4)

on the Face Plate of the Coin
Mechanism (10). Turn the Handle one revolution. To dispense without using
coins, with the Globe off, lift the Coin Mechanism (10) upward from it’s
position. Turn over. Unscrew and remove the brass colored restraining arm
on the back of the Coin Mechanism (10). Reassemble.

Coin Mechanism (10)

Restraining Arm

See Figures 4 & 5.

Face Plate of the

Figure 5

SKU 92336-SKU92337 For technical questions, please call 1-800-444-3353. Page 4

Attaching the Stand to SKU 92337:

1. Attach the four Feet (12) to Center Disk (13) with four Screws (14) and
Nuts (15).

See Figure 6.

2. Twist on Center Extension (16) to Center Disk (13). Twist Top Extension

(17) to Center Extension (16) and then the top threaded end to the Base
Plate (11) of the Gumball Machine. Tighten all hardware and connections.

See Figures 7 & 8.

Screw (14)

Nut (15)

Center Disk

(13)

Gumball Machine

Base Plate (11)

Feet (12)

Center Extension (16)

Top Extension (17)

Figure 6

Figure 8

Threaded

area to
attach to
Gumball

Machine.

Top

Extension (17)

Center

Extension (16)

Feet (12)

Figure 7

The 15” Gumball Machine with Stand fits well in a corner or out of the traffic area,
and must be located on a flat, level floor surface.

Maintenence

1. To remove dust, use a damp cloth. To remove grease or oil, use a detergent
based cleaning solvent, rinse with damp cloth, and dry.

SKU 92336-SKU92337 For technical questions, please call 1-800-444-3353. Page 5

Parts List

Part # Description Qty.

1
1
1
1
1
1
1
1
1
1
1

10

1

Plug

2

Cap

3

Nut
Retaining Ring

4

Globe

5

Gasket

6

Brush Plate

7

Adjustable Wheel

8

Body

9

Coin Mechanism

11

Base Plate

Part 10

Part # Description Qty.

12
13
14
15
16
17

Feet
Center Disk
Screw
Nut
Center Extension
Top Extension

4
1
4
4
1
1

Parts Identification

Part 1
Part 2

Part 3
Part 4

Part 5

Part 6

Part 7

Part 8

Part 9

Part 17

Part 16

Part 14

Part 12

Part 13

Part 15

Part 11

NOTE: Some parts are listed and shown for illustration purposes only and are not
available individually as replacement parts.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFA CTURER AND/OR DISTRIBUT OR HAS PRO VIDED THE PARTS DIAGRAM IN THIS MANU AL
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REP AIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS
OF THE PRODUCT. IN FA CT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THat
ALL REP AIRS AND PARTS REPLACEMENTS SHOULD BE UNDERT AKEN BY CERTIFIED AND LICENSED
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING
OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.

SKU 92336-SKU92337 For technical questions, please call 1-800-444-3353. Page 6