Harbor Freight Tools 92258 User Manual

®

UNDERHOIST STAND

WITH FOOT PED AL

92258

ASSEMBLY & OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No por tion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please

complete the owner’s record below:

Model

______________ Serial No._____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE y ou begin assembly.

Technical Specifications

Maximum Capacity: 1,650 Lbs.
Height Range: 55" to 81-1/2"
Lift: 26-1/2"
Base: 11-3/4" diameter x 3/16"
Overall Dimensions: 21" long x 12" O.D. x 58-1/2" Height
Weight: 35 Lbs.
Spin handle with thrust bearing for quick adjustments, all steel
contruction. Foot pedal for fine workload adjustments.

General usage: This Underhoist Stand with Foot Pedal can be used to adjust vehicle transmissions
and mufflers that are secured inside an already supported vehicle.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions . Keep work area well lighted.

3. Store idle equipment. When not in use, the Underhoist Stand must be stored in a dry location
to inhibit rust. Always lock up products and keep out of reach of children.

4.

Use the right product for the job. There are certain applications for which the Underhoist
Stand was designed. It will do the job better and more safely supporting a load for which it was
intended. Do not modify the Underhoist Stand and do not use the Underhoist for a purpose for
which it was not intended.

5. Check for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.

SKU 92258 For technical questions please call 1-800-444-3353. Page 2