Harbor Freight Tools 92247 User Manual

HAND HELD SAHAND HELD SA

HAND HELD SA

HAND HELD SAHAND HELD SA

W MILLW MILL

W MILL

W MILLW MILL

92247

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

Copyright © 2004 by Harbor Freight Tools®. All rights reser ved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Specifications

Item Description

Dimensions 6 (W) x 7-7/8 (L) x 4-1/2 (H) inches
Fence Size: 7-7/8 (W) x 4 (H) x 3/8 (T) inches; Adjustable 4-1/2

inches lateral travel (maximum) with Acme lead screw

Weight 5.8 lbs.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.

4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.

5. Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.

6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.

7. Use eye and ear protection. Always wear ANSI approved impact safety glasses.
Wear a full face shield (over the safety glasses) if you are producing metal filings or
wood chips. Wear an ANSI approved dust mask or respirator when working around
metal, wood, and chemical dusts and mists.

8. Do not overreach. Keep proper footing and balance at all times. Do not reach over
or across running machines.

SKU 92247 For technical questions, please call 1-800-444-3353

Page 2

9. Maintain tools with care. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect
tool cords periodically and, if damaged, have them repaired by an authorized
technician. The handles must be kept clean, dry, and free from oil and grease at all
times.

10. Disconnect power. Unplug band saw when not in use.

11. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches
are removed from the tool or machine work surface before plugging it in.

12. Avoid unintentional starting. Be sure the band saw switch is in the Off position
when not in use and before plugging in.

13. Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.

14. Take caution as some woods contain preservatives such as copper chromium
arsenate (CCA) which can be toxic. When cutting these materials extra care should
be taken to avoid inhalation and minimize skin contact.

15. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be proper ly repaired or replaced by a qualified
technician. Do not use the tool if any switch does not turn On and Off properly.

16. Guard against electric shock. Prevent body contact with grounded surfaces such
as pipes, radiators, ranges, and refrigerator enclosures.

17. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty.

18. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels if taking prescription medicine to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.

19. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.

20. Band Saw Precautions. Read and understand the Band Saw Operation Manual and
follow all operational, safety warnings and precautions therein before each use.

21. Use tools with both hands when required. Many tools such as this Saw Mill, and
chain saws, drills, routers, etc., require the use of both hands when operating. This
helps maintain tool stability and keeps hands away from the working area of the tool.

Warning: The brass components of this product contain lead, a c hemical known to the
State of California to cause birth defects (or other reproductive harm). (California Health
& Safety Code 25249.5 et seq.)

SKU 92247 For technical questions, please call 1-800-444-3353

Page 3