Harbor Freight Tools 92192 Owner's Manual

WINDOW

VENT OPENER

92192

ASSEMBLY AND OPERATING INSTRUCTIONS

Shown installed on Sku 47712 - Greenhouse (sold separately).

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No portion
of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.

For technical questions, please call 1-800-444-3353

REVISED FRONT COVER 03/06

snoitacificepS

erutarepmeTgninepOF°77-°95

erutarepmeTmumixaMF°221

tfiLthgieWmumixaM.sbL51

elgnAgninepOmumixaM°09

IMPORTANT

Harbor Freight Tools is not responsible for damage to any plants in

the greenhouse due to malfunction of the vent opener.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,

operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using this product, basic safety precautions should always be followed
to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Keep work area well lit during setup.

3. Keep children away. Children must never be allowed in the work area during setup.

Do not let them handle or play with this product.

4. Use the right product for the job. Do not attempt to force a small product to do the

work of a larger product. There are certain applications for which this product was
designed. Do not modify this product and do not use this product for a purpose for
which it was not intended.

5. Dress properly. Protective, electrically nonconductive clothes and nonskid footwear

are recommended during setup. Wear restrictive hair covering to contain long hair.

6. Use eye protection. Always wear ANSI approved impact safety goggles during setup.

7. Stay alert. Watch what you are doing, use common sense. Do not install any product

when you are tired.

8. Check for damaged parts. Before using any product, any part that appears damaged

should be carefully checked to determine that it will operate properly and perform its
intended function. Check for any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should be prop­erly repaired or replaced by a qualified technician.

9. Maintenance. For your safety, service and maintenance should be performed regu-

larly by a qualified technician.

SKU 92192 For technical questions, please call 1-800-444-3353. Page 2