This flashlight is ideal for camping and outdoor use. The 90 degree head angle
makes it easy to shine the light ahead while holding the flashlight at a natural
angle. The four interchangeable colored lenses allow you to suit the flashlight to
your particular lighting needs. There is a blinking function for signaling, or to alert
rescue personnel in the event of an emergency. Krypton bulbs provide 70% brighter
light than standard bulbs. A spare Krypton bulb is stored in the flashlight.
Save This Manual
You will need the manual for the saf ety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. K eep
your invoice with this man ual. Write the invoice number on the inside of the front
cover. Keep the manual and in v oice in a safe and dry place for future reference .
Safety Warnings and Precautions
WARNING: When using this flashlight, basic saf ety precautions should always
be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this flashlight!
1.Keep work area clean. Cluttered areas invite injuries.
2.Keep children away . Children must never be allowed in the work area. Do
not let them use flashlights, or extension cords without adult supervision.
3.Store idle equipment. When not in use , flashlights must be stored in a dry
location to inhibit rust. Always lock up flashlights and keep out of reach of
children.
4.Use the right flashlight for the job. There are certain applications for which
this flashlight was designed. It will do the job better and more safely at the
rate for which it was intended. Do not modify this flashlight and do not use
this flashlight for a purpose for which it was not intended.
5.Do not overreach. K eep proper footing and balance at all times. Do not reach
over or across running machines.
6.Maintain flashlights with care. K eep flashlights maintained and clean for
better and safer performance. Follow instructions for maintenance and
changing accessories. The handles must be k ept clean, dry , and free from oil
and grease at all times.
7.Disconnect power. Turn off flashlight when not in use. Remove batteries if
flashlight is not going to be used for a long period of time.
8.Av oid unintentional starting. Be sure the s witch is in the Off position when
not in use and before replacing batteries.
9.Stay alert. Watch what you are doing, use common sense. Do not operate
any flashlight when you are tired.
10. Check for damaged parts. Bef ore using any flashlight, an y part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for any condition that may affect
proper operation. Any part that is damaged should be properly repaired or
replaced by a qualified technician. Do not use the flashlight if the switch does
not turn On and Off properly.
11. Guard against electric shock. Prevent body contact with grounded surfaces
such as pipes, radiators, ranges, and refrigerator enclosures.
12. Do not use camping equipment if under the influence of alcohol ordrugs. Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not use this
product or other camping appliances.
13. Maintenance. F or your saf ety , service and maintenance should be performed
regularly by a qualified technician. To maintain water resistance, be sure that
all rubber seals are not damaged and properly installed.
14. The compass contains mineral oil, which can be harmful if ingested.
Discard the flashlight if leaking or otherwise damaged, and rinse any areas
that come into contact with the oil thoroughly .
NOTE: This flashlight is water resistant, b ut not water proof. When properly assembled and maintained, you may use it with confidence in rain or damp conditions. How e v er, if it is totally immersed in water if is likely to be damaged.
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may oc-
cur. It must be understood b y the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
Unpacking
When unpacking, check to make sure the f ollowing parts are included.
Flashlight
4 filters stored in the filter compartment
Spare Krypton bulb, stored in the spare bulb compartment
If any parts are missing or broken, please call Harbor Freight Flashlights at the
number on the cover of this manual.
NOTE: Warranty replacement parts or accessories specific to this flashlight are not
available from Harbor F reight Tools for this item. Replacement batteries and light
bulbs may be av ailable at y our local Harbor F reight Tools retail outlet, or are
commonly available from hardware and department stores.
Operation
First install two (2) “AA” batteries (not included).
1.Remove the battery compartment cap, located at the bottom of the flashlight,
by turning it counterclockwise.
2.Insert two “AA” batteries (not included) into the battery compartment,
observing the polarity markings on the flashlight case. Please see picture.
3.Replace the battery compartment cap, and secure it by turning clockwise until
hand tight.
1.The lenses are stored in a compartment at the bottom of the flashlight, under
the compass. Open this compartment by turning the cap counterclockwise.
2.Select the desired lense. NO TE: Your pref erence may v ary, but suggested
lens application is: RED for very low light output, GREEN for low light output,
YELLOW for contrast in haze or fog, FROSTED for diffused light.
3.To change or install the lense, remo ve the
lense cover by turning counterclockwise.
Replace the existing lense with the desired
lense. Replace the lense cover , and tighten b y
turning clockwise until finger tight.
To operate the flashlight:
1.To turn on the flashlight, press the upper
part of the ON /OFF switch down.
2.To turn off the flash light, press the lower
part of the ON / OFF switch down.
3.To manually blink the flashlight, press the round “blink” button and release .
Maintenance
1.When not in use, turn OFF the flashlight to save the
batteries.
2.If the flashlight will not be used for several months,
remove the batteries before storage to prevent
possible damage caused by leaking batteries.
6.Remove the old bulb from the Bulb
Holder by pulling it straight out.
Place the new bulb in the Bulb
Holder, and replace the Bulb Holder
in the Lantern Head. Secure by
turning the Bulb Holder clockwise
until finger tight.
7.Replace the Lantern Head in the
Flashlight. Turn clockwise until finger
tight. Do not overtighten, as this
might damage the rubber seal.
3.In case the bulb burns out, a
spare battery is stored in a container at
the bottom of the flashlight. Remove the
battery by turning the storage container
counterclockwise.
4.Remove the Lantern Head by
turning it counterclockwise. Please refer
to the photo at left. Remove the Bulb
Holder from the Lantern Head by turning
it counterclockwise.
Using the compass.
1.Invert the flashlight, holding the compass
upright. Wait a moment while the compass stops
moving.
2.The compass will orient itself to the
magnetic directions. N toward the North, S toward
the South, etc.
3.There are many uses for a compass. For
example by taking bearings as you move away
from a starting point, you may be able to find your
way back by reversing those directions on the
return trip. Or you can find landmarks on a map
by orienting yourself with the compass.