For technical questions or replacement parts, please call 1-800-444-3353.
Specifications
General ConstructionSteel
Platform Dimensions
Height Range7” to 29--1/2”
Maximum Capacity1000lbs. (1/2 ton)
Valve OperationHydraulic Valve Foot Pedal
Maximum Elevation31”
Features
Weight350 Lbs.
86-1/2”L x 26-3/4”W
Tire Vise
Caster Wheels w/ Mechanical Brake
Position Locking Safety Bar
This motorcycle lift is ideal for maintenance on your motorcycle. Its rugged steel
construction and generous 1000 lb. lift capacity are ideal for most home or small
shop maintenance jobs on motorcycles. The foot operated hydraulic jack allows
you to keep your hands free while lifting or lowering the motorcycle. The ramp is
detachable for flexible use, and includes dual mounting pins to allow to you configure
the lift to best fit your motorcycle. The removable platform panel makes rear wheel
removal easy. The three-position vise opens up to a generous 6-1/8” to accept even
the widest tires. The steel, locking casters allow you to move the motorcycle on the
lift easily around the shop, and lock it into place for maintenance work.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this lift, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment. This
lift is a heavy piece of equipment. Take extra precautions and use at least 2
people when moving the Motorcycle Lift.
Read all instructions before using this lift!
1. Keep work area clean. Cluttered areas invite injuries.
SKU 91764 For technical questions, please call 1-800-444-3353. Page 2
REV 08k
2. Observe work area conditions. Do not use machines or power tools in damp
or wet locations. Don’t expose to rain. Keep work area well lighted.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location
to inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, clothes and non-skid footwear are recommended
when working. Wear restrictive hair covering to contain long hair.
7. Use eye and ear protection. Always wear ANSI approved impact safety
goggles. Wear an ANSI approved dust mask or respirator when working around
metal, wood, and chemical dusts and mists.
8. Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
9. Maintain tools with care. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories. The
handles must be kept clean, dry, and free from oil and grease at all times.
10. Remove adjusting keys and wrenches. Check that keys and adjusting
wrenches are removed from the tool or machine work surface before
operating.
11. Avoid unintentional lowering. Keep feet and hands away from the pump
pedal and release pedal when you are not prepared to raise or lower the lift.
Be sure that the Locking Bar (22) is in place during the time that the lift is not
intended to be lowered. Remove the Locking Bar only when you intend to lower
the lift, and it is safe to do so.
12. Stay alert. Watch what you are doing, use common sense. Do not operate any
tool when you are tired.
13. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired
or replaced by a qualified technician.
SKU 91764 For technical questions, please call 1-800-444-3353. Page 3
14. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are available
from Harbor Freight Tools.
15. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
16. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
17. Do not exceed the weight limit of this lift. Overloading the lift may result in
unexpected, rapid lowering of the object being held, as well as damage to the
lift itself; serious injury and property damage may result.
18. Assure that any load being supported by this lift is well balanced.
Unbalanced loads may cause the lift to fall over, potentially causing serious
personal injury or property damage.
19. This lift is not to be used for any aircraft purposes.
20. WARNING: Before standing or working underneath any elevated motorcycle,
be sure that the motorcycle is properly and safely secured. For your safety and
the safety of others, use good professional practice and common sense.
Caution: Always be aware of Dynamic Loading. If you drop a weight on the
Motorcycle Lift. It may create for a brief instant, an excess load. The Motorcycle
Lift is designed for 1,000 lbs. maximum load; do not exceed.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
Unpacking
When unpacking, check to make sure the following parts are included.
Main Lift Assembly Sliding Plate
Ramp Vise Assembly
Lift Foot Pedal Release Foot Pedal
Locking Bar Fastener Hardware Kit
If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.
SKU 91764 For technical questions, please call 1-800-444-3353. Page 4
Loading...
+ 7 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.