Harbor Freight Tools 90326 User Manual

MOUNTABLE WALL SINK

90326

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

Copyright © 2003 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Specifications

Overall Dimensions 34-1/4” W x 17-/58” Deep x 17” H
Sink Capacity 10.5 Gallons
Spout 10” H - 8” Overhang
Weight 11.2 Lbs.
Hose Fitting 3/4”

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed
to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Keep work area well lighted.

3. Keep children away. Children must never be allowed in the work area during
assembly. Do not let them play in the sink as it will not support their weight.

4. Store idle equipment. Always keep sink accessories out of reach of children.

5. Use the right tool for the job. Do not attempt to force a small product or attachment
to do the work of a larger industrial product. There are certain applications for which
this product was designed. It will do the job better and more safely at the rate for
which it was intended. Do not modify this product and do not use this product for a
purpose for which it was not intended.

6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.

7. Use eye protection. Always wear ANSI approved impact safety goggles during
assembly.

8. Do not overreach. Keep proper footing and balance at all times.

9. Maintain tools with care. Keep the sink and fixtures clean for better and safer
performance. Follow instructions for changing accessories. Inspect hoses periodically,
and if damaged, have them repaired by an authorized technician. The handles must
be kept clean, dry, and free from oil and grease at all times.

Page 2SKU 90326

10. Stay alert. Watch what you are doing, use common sense. Do not operate or
assemble the Sink when you are tired.

11. Check for damaged parts. Before using any product, any part that appears
damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment and binding of moving parts; any
broken parts or mounting fixtures; and any other condition that may affect proper
operation. Any part that is damaged should be properly repaired or replaced by a
qualified technician.

12. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this product. Approved accessories are available from Harbor
Freight Tools.

13. Do not operate the Sink if under the influence of alcohol or drugs. Read warning
labels if taking prescription medicine to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the product.

14. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.

Warning: The chrome covered copper tubing on the Faucet (Spout (#6)) is very delicate and
should be handled with care. Do not lift or pull on the Faucet (Spout (#6)).

Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under­stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.

Unpacking

When unpacking, check to make sure the parts listed on page 7 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.

WARNING: The brass components of this product contain lead, a chemical known to the
State of California to cause birth defects (or other reproductive harm). (California Health &
Safety code 25249.5, et seq.)

Page 3SKU 90326