Harbor Freight Tools 69456 User Manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

10' x 10'

Pop Up Canopy

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product

described herein. Tools required for assembly and service may not be included.

ITEM 69456

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Specifications

Dimensions

Canopy 150 Denier Polyester

10 FT x 10 FT at base 8 FT x 8 FT at canopy

Important Safety Information

1. Setup only according to these instructions. Improper setup can create hazards.

2. Wear ANSI-approved safety goggles during setup. Wear heavy-duty work gloves when working with frame parts.

3. Keep setup area clean and well lit.

4. Keep bystanders out of the area during setup.

5. Do not setup when tired or when under the influence of drugs or medication.

6. DO NOT USE IN HIGH WIND.

Remove cover if harsh weather or heavy rain threatens.

7. Do not allow snow, rainwater, or debris to accumulate or pool on shelter.

8. Anchor securely to flat, level, solid surface able to support shelter and vehicle according to manual instructions.

9. Inspect before setup and every use; do not setup or use if parts loose or damaged.

10. Read manual before setup and/or use.

11. This product is not a toy. Do not allow children to play with or near this item.

12. Use as intended only.

13. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

Page 2 For technical questions, please call 1-800-444-3353. Item 69456

Setup Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.

1. Place the Frame in the center of the desired location. With two people standing opposite each other, lift the Frame and pull it several feet apart.

CAUTION! Be careful not to pinch fingers or hands as you pull the Frame into shape.

2. Open the Frame completely and engage the Slider at each corner by pulling up on the Slider until it clicks into place.

3. Place the canopy over the Frame and secure the corners around the top of the Legs with the hook and loop tape.

Page 3For technical questions, please call 1-800-444-3353.Item 69456

+ 5 hidden pages