Harbor Freight Tools 68451 Owner's Manual

1/2 HP Cast Iron Sewage Pump

Item 68451 Specications

Minimum Water Height 4 IN..

Electrical Requirements 120V~ / 60Hz / 6 A

Maximum Flow 4,500 GPH

Maximum Lift 18 FT.

Solid Handling 2 IN.

Pressure 7.5 PSI

Motor 1/2 Horsepower Electric

Outlet Size 2 IN. NPT

Switch Type Tether Float

Power Cord Length 10 FT.

Maximum Water Temperature 131° F (55°C)

252728

SBW300

Read the separate Sewage Pump Safety Warnings, Installation and Operation Instructions before using this product. Failure to do so can result in serious injury. SAVE THIS SPECIFICATION SHEET AND THE SEWAGE PUMP SAFETY WARNINGS, INSTALLATION AND OPERATION INSTRUCTIONS FOR FUTURE REFERENCE.

When unpacking, make sure that the product is intact and undamaged.

If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.

Visit our website at: http://www.harborfreight.com

or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Parts List and Assembly Diagram

Part Description Qty

1 Base 1 2 Rubber Gasket 1 3 Impeller 1 4 Shaft 1 5 Screw 6 6 Motor 1 7 Float Switch Cord 1 8 Pump Cord 1 9 Float Assembly 1

Record Product’s Serial Number Here:

Note: If product has no serial number,

record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.

For technical questions, please call 1-800-444-3353.SKU 68451

Sewage Pump

Safety Warnings, Installation and Operation Instructions

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS SEWAGE PUMP SAFETY WARNINGS, INSTALLATION AND OPERATION INSTRUCTIONS AND THE SPECIFICATION SHEET FOR FUTURE REFERENCE.

When unpacking, make sure that the product is intact and undamaged.

If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.

Note: There may be some slight differences in the appearance of the various sewage pumps, however the instructions in this manual apply to all of such pumps provided by Harbor Freight Tools.

Visit our website at: http://www.harborfreight.com

or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

+ 7 hidden pages