Harbor Freight Tools 68115, 69073 Product manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

18 PIECE CARBON STEEL HOLE SAW SET

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product

described herein. Tools required for assembly and service may not be included.

ITEM 68115 69073

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Specications

Type Carbon Steel

Piece Count 18

Saw Sizes

3/4″, 1″, 1-1/8″, 1-1/4″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/2″, 3″, 3-1/2″, 4″, 5″

Small Mandrel Large Mandrel

Other Pieces

Pilot Drill Bit Drive Plate Blow Molded Case

IMPORTANT SAFETY INFORMATION

1. Wear ANSI-approved safety goggles and heavy-duty work gloves during setup and use.

2. Set contains sharp blades. Keep away from children.

3. Use correct size arbor for

selected Hole Saw.

4. Verify drill’s chuck is in good

condition and ts securely.

5. Do not use excessive pressure when cutting a hole.

6. Use as intended only; do not modify tools.

7. Inspect before every use; do not use if parts are loose or damaged.

SAVE THESE INSTRUCTIONS.

8. Use both hands when drilling and keep blade at 90° to workpiece.

9. Store saw blades in Case in secure location away from children.

10. Read and adhere to all safety warnings and operating instructions of drill used with Set.

11. The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood

by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Page 2 For technical questions, please call 1-800-444-3353. Item 68115/69073

+ 2 hidden pages