Harbor Freight Tools 68113, 68990 Product manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

14 PC. BI-METAL HOLE SAW SET

3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/4″, 2-1/2″ Hole Saws

Spare Pilot Drill

Large Mandrel

Small Mandrel with Medium Adapter

Blow Molded Case

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product

described herein. Tools required for assembly and service may not be included.

ITEM 68113 68990

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

IMPORTANT SAFETY INFORMATION

1. Wear ANSI-approved safety goggles and heavy-duty work gloves during setup and use.

2. Set contains sharp blades. Keep away from children.

3. Use correct size arbor for

selected Hole Saw.

4. Verify drill’s chuck is in good

condition and ts securely.

5. Do not use excessive pressure when cutting a hole.

6. Use as intended only; do not modify tools.

7. Inspect before every use; do not use if parts are loose or damaged.

8. Use both hands when drilling and keep blade at 90° to workpiece.

9. Store saw blades in Case in secure location away from children.

10. Read and adhere to all safety warnings and operating instructions of drill used with Set.

11. The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood

by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS.

Setup

TO PREVENT INJURY: Wear heavy-duty work gloves and ANSI-approved safety goggles during setup and whenever handling the saws.

1. Select the desired size Hole Saw and either the Large or Small Mandrel.

NOTE: Unthread the 2-1/2″ and 2-1/8″

Hole Saws from one another before use.

2. The correct size Mandrel will t exactly into the Hole Saw.

3. Use the Adapter to attach the Small Mandrel to medium size Hole Saws

(such as 1-3/8″ and 1-1/2″ sizes.)

Carefully thread the Adapter into the Hole Saw and then thread the Small Mandrel through the bottom so that it screws into the Adapter.

4. To attach Hole Saw to the Large Mandrel, see illustrations and instructions on facing page.

5. Open Jaws of Drill Chuck (sold separately).

6. Place the Mandrel Shaft completely into the Chuck and securely tighten the Chuck.

Page 2 For technical questions, please call 1-800-444-3353. Items 68113/68990

+ 2 hidden pages