Harbor Freight Tools 67511 Owner's Manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
ITEM 67511
1000 lb. capacity
2 piece set
vehicle dollies
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Copyright© 2012 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Specifications
Maximum Weight Capacity 1000 lb. (per Dolly)
Wheels Four Swivel Casters
Maximum Tire Width 13-9/16"
Important Safety Information
Assembly Precautions
1. Assemble only according to these
instructions. Improper assembly
can create hazards.
2. Wear ANSI-approved safety goggles
and heavy-duty work gloves
during assembly.
3. Keep assembly area clean and well lit.
Use Precautions
1. Study, understand, and
follow all instructions before
operating this device.
2. Do not exceed rated capacity.
3. Use only on hard level surface.
4. Before moving a load, assure that
the load is centered and secured
with a load restraint device.
5. No alterations shall be
made to this product.
6. Wear ANSI-approved safety
goggles and heavy-duty
work gloves during use.
7. Keep clear of load′s path while
placing on and removing from
dollies, and while moving.
8. Do not use for aircraft purposes.
4. Keep bystanders out of the
area during assembly.
5. Do not assemble when tired
or when under the influence
of drugs or medication.
6. Weight capacity and other product
capabilities apply to properly and
completely assembled product only.
9. Inspect before every use; do not
use if parts loose or damaged.
10. Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
11. Use Vehicle Dollies to support FRONT
or REAR end of the vehicle. Do
not use Dollies to support one side
of vehicle. Use four Dollies (two
pairs) to support entire vehicle.
12. Read vehicle owner’s manual
and instruction manual for
Jack (not included) for proper
jacking positions before use.
13. Position Dollies so that rails
are parallel to the wheels.
Page 2 For technical questions, please call 1-800-444-3353. Item 67511
Loading...