Harbor Freight Tools 67421 Product manual
11 DRAWER
67421
ROLL CABINET
INSTRUCTIONS AND PRECAUTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
REV 10e
For technical questions or replacement parts, please call 1-800-444-3353.
72” 3-DRAWER ROLLER CABINET
SPECIFICATIONS
Drawer Size Weight Capacity
Top 16-3/4” x 21-3/4” x 2-3/4” 26.5 lb.
Middle 16-3/4” x 21-3/4” x 2-3/4” 26.5 lb.
Bottom 16-3/4” x 21-3/4” x 2-3/4” 26.5 lb.
Cabinet 16-3/4” x 26-3/4” x 13-1/4” 44 lb.
Total Capacity: 123.5 lbs. plus 286.5 lbs. on top
Roller Cabinet made from heavyduty sheet steel with crinkle
black nish
UNPACKING
When unpacking, make sure that the item is
intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at the
number shown on the cover of this document as
soon as possible.
IMPORTANT SAFETY
INFORMATION
Assembly Precautions
Assemble only according to these instructions. 1.
Improper assembly can create hazards.
Wear ANSI-approved safety goggles and 2.
heavy-duty work gloves during assembly.
Keep assembly area clean and well lit.3.
Keep bystanders out of the ar ea during 4.
assembly.
Be careful w h e n c u t t i n g the package 5.
banding.
Do not assemble when tired or when under the 6.
inuence of drugs, alcohol or medication.
Do not lift by hand. Do not roll or lift while 4.
loaded.
Wear ANSI-approved safety goggles during 5.
assembly and use.
Do not allow children to play with or near this 6.
item.
Inspect before every use; do not use if parts 7.
are loose or damaged.
Maintain product labels and nameplates. 8.
These carry important safety information. If
unreadable or missing, contact Harbor Freight
Tools for a replacement.
Lock the Swivel-Caster Brakes by stepping on 9.
one side of the brake lever, when this chest is
not to be moved. This prevents the product
from rolling unexpectedly.
To unlock the brake, pull up on the brake
lever.
To prevent tipping, do not mount this product on 10.
a truck bed or any other moving object.
Secure this product well before moving it with 11.
a forklift.
Do not modify this cabinet. 12.
Keep the product on level surfaces. The 13.
product may become unstable and tip if stored
or moved onto a sloped surface.
Close and lock the drawers before moving. 14.
The drawers could come open and make the
product unstable.
If an upper chest is placed onto this Roller 15.
Cabinet, be sure the upper chest is placed
securely onto the bottom cabinet.
Use Precautions
Do not stand or climb on this item.1.
Do not exceed 26 lb. drawer capacity, evenly 2.
distributed from bottom up. Do not exceed 286
lb. top shelf capacity or 44 lb. bottom storage
area capacity. Be aware of dynamic loading!
Sudden load movement may briey create
excess load causing product failure.
Do not open more than one drawer at once.3.
SKU 67421 For technical questions, please call 1-800-444-3353. Page 2
ASSEMBLY INSTRUCTIONS
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning
of this document including all text under
subheadings therein before set up or
use of this product.
Note: Use the Parts List & Diagram as a guide on
page 4 when assembling this product.
Attach the Cabinet Handle (4) to one side of the 1.
Cabinet (1) using Bolts (5) and Nuts (3).
Note: Handle may be attached to either side of chest.
Use Plugs (7) to cap the two holes on the side
without the Handle installed.
Attach the Drawer Handles (12) to each Drawer 2.
(2), using the Bolts (10) and Washers (11).
To install the Rigid Casters (18):3.
Align one of the Rigid Casters with the holes a.
on the bottom of the Cabinet.
Insert a Screw (19) through the Rigid Caster b.
(18) and the bottom of the cabinet.
Inside the Cabinet, place a Washer (16) and c.
Spring Washer (15) onto the Screw, Secure
in place with the Nut (14).
Repeat d. b. and c. for each screw on the
Caster.
Repeat e. a. through d. for each Caster.
Slide the Drawers into place on the Slides (9) 4.
along the inside of the Cabinet.
Fig. 1
a. Simultaneously press the plastic lock spring
up or down and pull the inner drawer slide out
(See Fig. 1).
To Reassemble: Insert the end of the inner b.
drawer slide into the middle drawer slide and
push completely into opening.
OPERATION
Close all drawers and door and lock them using 1.
the supplied Lock Bar (13) and Key (20).
Push the Cabinet to desired location.2.
Be sure the Cabinet is on a smooth, at, stable 3.
surface at all times.
Lock the brakes of the Swivel Casters (6) after 4.
moving Roll Cabinet.
MAINTENANCE/REPAIR
Check that casters and drawer slides are work-1.
ing properly before use.
To remove drawers:2.
SKU 67421 For technical questions, please call 1-800-444-3353. Page 3
Loading...