Harbor Freight Tools 66322, 66323 Instructions And Precautions
FLEXIBLE LED
WIRELESS LED
WORKLIGHT
66322
INSTRUCTIONS AND PRECAUTIONS
LIGHT BAR
66323
(Hand tools not included)
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
SAVE THESE INSTRUCTIONS. READ ALL
PRECAUTIONS AND INSTRUCTIONS.
Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
66322 LED Flexible Worklight
Batteries (6) “AA” Batteries (sold separately)
LEDs 15
Switch On/Off Push Button with Dimmer
66323 Wireless LED Light Bar
Batteries (6) “AA” Batteries (sold separately)
LEDs 10
Switch On/Off Push Button with Dimmer
UNPACKING
When unpacking, make sure the item is
intact and undamaged. If parts are missing or broken, call Harbor Freight Tools at 1-800-444-3353.
IMPORTANT SAFETY
INFORMATION
(FOR BOTH 66322 AND 6632)
Mount only according to these instructions. 1.
Improper assembly can create hazards.
Wear ANSI-approved safety goggles and 2.
heavy-duty work gloves during mounting.
Position batteries in proper polarity and do 3.
not install batteries of different types, charge
levels, or capacities together.
Verify that mounting surface has no hidden 4.
utility lines before drilling or driving screws.
People with pacemakers should consult their 5.
physician(s) before use. Electromagnetic
elds in close proximity to heart pacemaker
could cause pacemaker interference or pace-
maker failure.
This product is not a toy. Do not allow chil-6.
dren to play with or near this item.
Use as intended only.7.
Mount only on solid, at surface able to sup-8.
port weight of Light Disc.
Properly dispose of all used batteries.9.
Inspect before every use; do not use if parts 10.
loose or damaged.
Maintain product labels and nameplates. 11.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
BATTERY INSTALLATION
INSTRUCTIONS
(FOR 66322 WORKLIGHT)
To install batteries, press down on tab locat-1.
ed at bottom of Worklight base and slide out
red battery cartridge. See Figure 1, below.
Worklight
Base
Once battery cartridge is removed, pull up on 2.
tab on the back of the cartridge and remove
battery cover. See Figure 2, below.
Insert six “AAA” batteries, making sure to fol-3.
low indicated polarity.
Replace back cover and slide battery car-4.
tridge back into Worklight base until it snaps
back into place.
Battery Cover
Batteries
Figure 1
Battery
Cartridge
Figure 2
MOUNTING / OPERATION
INSTRUCTIONS (FOR 66322
WORKLIGHT)
The Worklight can be mounted via the 1.
magnetic base or by installing it’s mounting
frame.
SKU 66322 66323 For technical questions, please call 1-800-444-3353. Page 2
Loading...