Harbor Freight Tools 66151 User Manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.

REMOTE CONTROL

STUNT CAR

REV 12b

When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

Copyright© 2008 by Harbor Freight Tools®. All rights reserved.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product

described herein. Tools required for assembly and service may not be included.

Visit our website at: http://www.harborfreight.com

Email our technical support at: [e-mail]

ITEM 66151

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Specifications

Batteries Required

Frequency 49 MHz

FCC ID: VI8SB073111734249

4x “AA” Batteries (for Car)
1x 9V Battery (for Remote)

Important Safety Information

1. Changes or modifications not
expressly approved by the party
responsible for compliance
could void the user’s authority
to operate the equipment.

2. When using, basic safety precautions
should always be followed to
reduce the risk of personal injury
and/or damage to the product.

3. Do not allow children younger
than age 9 to use this Stunt Car.

Children should not operate
without adult supervision.

4. Sharp antenna on Remote

can cause injury.

5. Keep spectators and pets away.
Spectators should only watch
from a safe distance.

6. Position batteries in proper polarity

and do not install batteries of
different types, charge levels,
or capacities together.

7. Do not open the Stunt Car’s
housing or to modify its design.

Doing so may cause damage
and/or make it dangerous.

8. Do not use if parts are loose
or damaged. If the toy has been
damaged, immediately stop use.

9. Only use outside or in large,
enclosed area. Do not drive near open
flames, pets or delicate furniture.

10. If you start losing control, gently

reduce speed and stop the Stunt Car.

11. The warnings, cautions, and instructions
discussed in this instruction manual
cannot cover all possible conditions
and situations that may occur. It must
be understood by the operator that
common sense and caution are factors
that cannot be built into this product
but must be supplied by the operator.

12. Maintain product labels and
nameplates. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.

Assembly

1. Carefully slide the foam box containing
the Stunt Car from the cardboard box.

2. Remove the Remote and the antenna.

3. Thread the Antenna into the
top of the Remote.

Page 2 For technical questions, please call 1-800-444-3353. Item 66151

4. Remove the Stunt Car from the foam
package. If any part seems to not
come out easily, stop and remedy
the obstruction before proceeding.