Harbor Freight Tools 65889 Owner's Manual
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2008 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
30 Bin Wall Mount
Parts Rack
Items 65889/69571
REV 12a
Page 2 For technical questions, please call 1-800-444-3353. Item 65889
69571
Specifications
Weight Capacity
Blue Bins = 3-1/2 lb. each
Red Bins = 2 lb. each
Material Polypropylene
Important Safety Information
Installation Precautions
1. Install only according to these
instructions. Improper installation
can create hazards.
2. Wear ANSI-approved safety goggles
and heavy-duty work gloves
during installation.
3. Keep installation area clean and well lit.
4. Keep bystanders out of the
area during installation.
5. Do not install when tired or when under
the influence of drugs or medication.
6. Weight capacity and other product
capabilities apply to properly and
completely installed product only.
7. Mount on a solid wood surface
capable of supporting product’s
fully loaded weight.
8. Carefully inspect the mounting area
to make sure there are no hidden
electrical wires, cables or pipes.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use
if parts are loose or damaged.
4. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
Loading...