Harbor Freight Tools 64827 Owner's Manual & Safety Instructions

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 19b

Visit our website at: http://www.harborfreight.com

Email our technical support at: [e-mail]

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

Copyright© 2019 by Harbor Freight Tools®. All rights reserved.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

To ol s re q u ir e d fo r as s e mb l y a n d s e r vi c e m a y n o t b e in c l ud e d .

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Specifications

Weight Capacity 600 lb, centered above Work Station

IMPORTANT SAFETY INFORMATION

Set up Precautions

1. Set up only according to these instructions.
Improper set up can create hazards. Unfold all
parts completely and engage all locks before use.

2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during set up.

3. Keep work area clean and well lit.

Use Precautions

1. Do not stand or sit on Work Station.

2. This product is not a toy. Do not allow
children to play with or near this item.

3. Use as intended only.

4. Inspect before every use; do not use
if parts are loose or damaged.

5. Do not exceed listed weight capacity, centered above
Work Station. Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.

6. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.

4. Keep bystanders out of the area during set up.

5. Do not set up when tired or when under the
influence of alcohol, drugs or medication.

6. Weight capacity and other product capabilities apply
to properly and completely set up product only.

7. Use on hard, flat surface that is capable of
supporting weight of Work Station and workpiece.

8. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

9. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.

Page 2 For technical questions, please call 1-888-866-5797. Item 64827

Functions

Fixed Jaw

Grip

Vise Switch

Pedal Release

Pedal

Sliding Jaw

Slide Knob

Rear Leg

Lock Lever

Rear

Leg

Foot Lock

Lever

Front Legs

Front Leg Locks

Rear Foot

Page 3For technical questions, please call 1-888-866-5797.Item 64827