Harbor Freight Tools 60562 Owner's Manual

Specifications

Batteries 2 “AA”, NiCd

Run Time up to 8 hours

Charge Time 6 hours

Important Safety Information

1. Wear ANSI-approved
safety goggles during setup.

2. Keep setup area clean and well lit.

3. Keep bystanders out of the
area during setup.

4. Do not setup when tired or
when under the influence of
alcohol, drugs or medication.

5. Position batteries in proper polarity and
do not install batteries of different types,
charge levels, or capacities together.

6. This product is not a toy. Do not allow
children to play with or near this item.

Instructions

1. Unscrew the Battery Cap located at
the rear of the Spotlight by twisting
it counterclockwise. See Figure A.

Battery Cap

7. Use as intended only.

8. Inspect before every use;
do not use if parts are
loose or damaged.

9. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

10. CONTAINS NICKEL-CADMIUM
BATTERY. BATTERY MUST BE
RECYCLED OR DISPOSED
OF PROPERLY.

2. Located underneath the
Internal Battery Cover is the Switch ­shown in Figure B, facing page.
Turn the Switch to the AUTO position.
Moving the Switch to AUTO
will automatically turn on the
Solar Spotlight during the night.

3. Squeeze the two sides of
the Internal Battery Cover as
shown in Figure B to remove it
and expose the Batteries.

Figure A

Page 2 For technical questions, please call 1-800-444-3353. Item 60562