Harbor Freight Tools 60363 Quick Start Guide
For technical questions, please call 1-800-520-0882.
Visit our website at: http://www.harborfreight.com
Email our technical support at: predator@harborfreight.com
QUICK START GUIDE
Horizontal Shaft Gas Engine Item: 60363
Engine Components
A. Fuel Cap
B. Muffler
C. Air Filter
D. Oil Drain Plug
TM
E. Throttle
F. Engine Switch
G. Starter Handle
H. Choke
I. Fuel Valve
14d
READ AND UNDERSTAND USER MANUAL BEFORE USE.
10i
READ AND UNDERSTAND USER MANUAL BEFORE USE.
STOP
Add Fluids
Check oil and fuel levels
If needed, fill as shown below
Add oil to engine
crankcase
Add fuel to within
1" of the rim of the tank
Note: Use regular Unleaded 87 Octane.
Engine not designed for E85 Ethanol blend.
Starting Procedure
1. CLOSE CHOKE
2. OPEN FUEL VALVE
TM
Move 1/3
toward fast
3. ADJUST THROTTLE
Assembly
Mount the engine
securely in place
O
4. SWITCH ON
IMPORTANT: Breaking-in the engine will help to ensure proper equipment and engine performance.
The operational break-in period will last about 3 hours of use.
During this period: • Do not apply a heavy load. • Do not operate the engine at its maximum speed.
I
5. PULL START
6. CHOKE TO RUN
ON
Loading...