Harbor Freight Tools 60363 Product manual

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and

Keep this manual and the receipt in a safe and dry place for future reference.

the receipt in a safe and dry place for future reference.

REV 15a

212cc

Horizontal Engine

Using an engine indoors CAN KILL YOU IN MINUTES.

Engine exhaust contains carbon monoxide. This is a poison you cannot see or smell.

NEVER use inside a home or garage, EVEN IF doors and windows are open.

Email our technical support at: predator@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Tools required for assembly and service may not be included.

Only use OUTSIDE and far away from windows, doors, and vents.

Visit our website at: http://www.harborfreight.com

ITEM 60363

Read this material before using this product.

Read this material before using this product. Failure to do so can result in serious injury.

Failure to do so can result in serious injury. SAVE THIS MANUAL.

SAVE THIS MANUAL.

Table of Contents

Specifications ............................................. 2

Safety ......................................................... 3

Setup .......................................................... 6

Operation .................................................... 7

Specifications

Displacement 212cc

Engine Type

Cooling System Forced air cooled

Fuel

Engine Oil

Run Time @ 50% Load with full tank 3 hr. Sound Level at 22 feet 104 dB Bore x Stroke 70 mm x 55 mm Compression Ratio 8.5:1 Rotation viewed from PTO

(power takeoff - the output shaft)

Type

Capacity 0.9 Gallon (3.6 Liter)

Type SAE

Capacity 0.5 Quart

Shaft 3/4″ x 2.43″

Maintenance .............................................. 10

Troubleshooting ......................................... 14

Warranties ................................................. 19

Parts List and Diagram .............................. 16

Horizontal Single Cylinder 4 stroke OHV

Meets EPA phase III emissions standards

87+ octane stabilizer treated unleaded gasoline

10W-30 above 32° F 5W-30 at 32° F or below

Counterclockwise

Shaft

Spark Plug

Valve Clearance

Speed Idle 1,800 ± 150 RPM

Keyway 3/16″ (4.76 mm)

End Tapped 5/16″ - 24 UNF

Type

Gap 0.7 - 0.8 mm

Intake 0.10 - 0.15 mm Exhaust 0.10 - 0.15 mm

NGK® BP-6ES NHSP® / Torch® F6TC

Page 2 For technical questions, please call 1-888-866-5797. ITEM 60363

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Symbol Definitions

Symbol Property or Statement

RPM

Revolutions Per Minute

Horsepower

WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved safety goggles with side shields.

Read the manual before set-up and/or use.

WARNING marking concerning Risk of Hearing Loss. Wear hearing protection.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Symbol Property or Statement

WARNING marking concerning Risk of Respiratory Injury.

Operate engine OUTSIDE and far away

from windows, doors, and vents. WARNING marking concerning

Risk of Fire while handling fuel. Do not smoke while handling fuel.

WARNING marking concerning Risk of Fire. Do not refuel while operating. Keep flammable objects away from engine.

SAFETYOPERATIONMAINTENANCE SETUP

Safety Warnings

WARNING! Read all instructions.

Failure to follow all instructions listed below may result in fire, serious injury and/or DEATH.

The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

Page 3For technical questions, please call 1-888-866-5797.ITEM 60363

Set up Precautions

1. Gasoline fuel and fumes are flammable, and

potentially explosive. Use proper fuel storage

and handling procedures. Do not store fuel

SAFETY OPERATION MAINTENANCESETUP

or other flammable materials nearby.

2. Have multiple ABC class fire extinguishers nearby.

3. Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

Operating Precautions

1. CARBON MONOXIDE HAZARD

Using an engine indoors CAN KILL YOU IN MINUTES.

Engine exhaust contains carbon monoxide. This is a poison you cannot see or smell.

NEVER use inside a home or garage, EVEN IF doors and windows are open.

Only use OUTSIDE and far away from windows,

doors, and vents.

2. Keep children away from the equipment, especially while it is operating.

3. Keep all spectators at least six feet from the Engine during operation.

4. Fire Hazard! Do not fill gas tank while engine is running. Do not operate if gasoline has been spilled. Clean spilled gasoline before starting engine. Do not operate near pilot light or open flame.

5. Do not touch engine during use. Let engine cool down after use.

6. Never store fuel or other flammable materials near the engine.

7. Only use a suitable means of transport and lifting devices with sufficient weight bearing capacity when transporting the Engine.

8. Secure the Engine on transport vehicles to prevent the tool from rolling, slipping, and tilting.

9. Industrial applications must follow OSHA requirements.

4. Set up and use only on a flat, level, well-ventilated surface.

5. Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during set up.

6. Use only lubricants and fuel recommended in the Specifications chart of this manual.

10. Do not leave the equipment unattended when it is running. Turn off the equipment (and remove safety keys, if available) before leaving the work area.

11. Engine can produce high noise levels. Prolonged exposure to noise levels above 85 dBA is hazardous to hearing. Always wear ear protection when operating or working around the gas engine while it is operating.

12. Wear ANSI-approved safety glasses, hearing protection, and NIOSH-approved dust mask/ respirator under a full face shield along with steel-toed work boots during use.

13. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to a heart pacemaker could cause pacemaker interference or pacemaker failure. Caution is necessary when near the engine’s magneto or recoil starter.

14. Use only accessories that are recommended by Harbor Freight Tools for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another piece of equipment.

15. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Gasoline-powered engines may ignite the dust or fumes.

16. Stay alert, watch what you are doing and use common sense when operating this piece of equipment. Do not use this piece of equipment while tired or under the influence of drugs, alcohol or medication.

17. Do not overreach. Keep proper footing and balance at all times. This enables better control of the equipment in unexpected situations.

18. Use this equipment with both hands

only. Using equipment with only one hand

can easily result in loss of control.

19. Dress properly. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

Page 4 For technical questions, please call 1-888-866-5797. ITEM 60363

Operating Precautions (cont.)

20. Parts, especially exhaust system components, get very hot during use. Stay clear of hot parts.

21. Do not cover the engine or equipment during operation.

22. Keep the equipment, engine, and surrounding area clean at all times.

23. Use the equipment, accessories, etc., in accordance with these instructions and in the manner intended for the particular type of equipment, taking into account the working conditions and the work to be performed.

Use of the equipment for operations different from

those intended could result in a hazardous situation.

24. Do not operate the equipment with known leaks in the engine’s fuel system.

25. WARNING: This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)

Service Precautions

1. Before service, maintenance, or cleaning:

a. Turn the engine switch to its “OFF” position.

b. Allow the engine to completely cool.

c. Then, remove the spark plug

cap from the spark plug.

2. Keep all safety guards in place and in proper working order. Safety guards include muffler, air cleaner, mechanical guards, and heat shields, among other guards.

3. Do not alter or adjust any part of the

equipment or its engine that is sealed by the manufacturer or distributor. Only a qualified service technician may adjust parts that may increase or decrease governed engine speed.

4. Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during service.

5. Maintain labels and nameplates on the equipment. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

6. Have the equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equipment is maintained. Do not attempt any service or maintenance procedures not explained in this manual or any procedures that you are uncertain about your ability to perform safely or correctly.

7. Store equipment out of the reach of children.

26. When spills of fuel or oil occur, they must be cleaned up immediately. Dispose of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a bottom-ventilated, covered, metal container.

27. Keep hands and feet away from moving parts. Do not reach over or across equipment while operating.

28. Before use, check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the equipment’s operation.

If damaged, have the equipment serviced before using. Many accidents are caused

by poorly maintained equipment.

29. Use the correct equipment for the application. Do not modify the equipment and do not use the equipment for a purpose for which it is not intended.

8. Follow scheduled engine and equipment maintenance.

Refueling:

1. Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling.

2. Do not refill the fuel tank while the engine is running or hot.

3. TO PREVENT FUEL LEAKAGE AND

FIRE HAZARD, do not fill fuel above the bottom of fuel strainer.

Max Fuel DO NOT OVERFILL!

4. Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed.

5. Refuel in a well-ventilated area only.

6. Wipe up any spilled fuel and allow excess to evaporate before starting engine.

To prevent FIRE, do not start the engine while the smell of fuel hangs in the air.

SAFETYOPERATIONMAINTENANCE SETUP

SAVE THESE INSTRUCTIONS.

Page 5For technical questions, please call 1-888-866-5797.ITEM 60363

Set Up

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

SAFETY OPERATION MAINTENANCESETUP

TO PREVENT SERIOUS INJURY: Operate only with proper spark arrestor installed.

Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

Engine Controls

At high altitudes, the engine’s carburetor, governor (if so equipped), and any other parts that control the fuel-air ratio will need to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent damage to the engine and any other devices used with this product.

The emission control system for this Engine is warranted for standards set by the

U.S. Environmental Protection Agency. For warranty

information, refer to the last pages of this manual.

WARNING! DO NOT INSTALL THIS ENGINE ON A VEHICLE. NOT FOR HIGHWAY USE. FOLLOW ALL APPLICABLE LAWS FOR INSTALLATION AND USE.

Air Filter

Oil Drain Plug

Fuel Cap

Starter Handle

Muffler

Throttle

Choke

Fuel Valve

Engine Switch

Dipstick

Page 6 For technical questions, please call 1-888-866-5797. ITEM 60363

+ 14 hidden pages