Harbor Freight Tools 60359 Owner's Manual
Specications
Capacity 1000 lb.
Wagon Deck 4 FT. long, 2 FT. wide
Wheels 10 IN. Turf-Tread Pneumatic Tires
IMPORTANT SAFETY INFORMATION
WARNING Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
1. DO NOT ALLOW CHILDREN TO PLAY WITH
OR AROUND THE WAGON. NOT A TOY.
2. Do not ride on this wagon.
3. Do not exceed 1000 lb. weight capacity,
evenly distributed.
4. When loading and unloading the wagon,
be careful of the balance of the wagon.
5. Be careful of the Handle which can tip
and fall from the upright position.
6. Chock the four wheels before loading
or unloading the wagon.
7. Wear ANSI-approved safety goggles during assembly.
8. Inspect before every use; do not use
if parts are loose or damaged.
9. Maintain product labels and nameplates. These carry
important safety information. If unreadable or missing,
contact Harbor Freight Tools for a replacement.
SAVE THESE INSTRUCTIONS.
Assembly
1. Turn the cart Bed (1) upside down.
Use the cardboard from the carton to keep
from scratching or damaging the nish.
2. Attaching Front Axle Support with Steering
Link Connector to Bed
Position the foldable Front Axle Support (2)
at a 90° angle and lock it in place with
Nut (14), Washer (11). Attach each end
of the Steering Link Connector (7) to the
Front Axle Support (2) with Nut (14), Bolt (9)
and Washer (11). Do not over-tighten.
Steering Link
Connector (7)
Bed (1)
Front Axle
Support (2)
3. Attaching Front Wheels
Slide the Wheel (6) onto the axle so
the valve stem faces out. Secure Wheel (6) to
axle using Washer (13) and Acorn Nut (16).
Wheel (6)
Acorn
Nut (16)
Washer
(13)
Front Axle
Support (2)
Page 2 For technical questions, please call 1-800-444-3353. Item 60359
Loading...