Harbor Freight Tools 54949 User Manual
MICROSCOPE
®
Model 54949
OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT DAMAGE TO THE PRODUCT,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright © 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
Item Description
Total Magnifications 10X ~ 20X
Objective Magnification 8X or 20X
Focusing Adjustment Eyepiece
Light Source Reflective Mirror (External Light Required)
Stages Travel Approximately 7/8”
Stages Adjustment Double Hand Wheel
Eyepiece Diameter 1-1/16”
Mirror Diameter 2-1/4”
Diaphragm Style 4 Positions (Adjustable)
Objectives Movement Fixed Objectives
Draw Tube Angle 45° (Fixed)
Turret and Table Tilt 0° to 90°
Overall Dimensions 3-5/16” W x 6-1/4” L x 11-1/8” H
Weight 2.75 Pounds
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure all the parts shown in the Parts List on page 7
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the front cover of this manual as soon as possible.
GENERAL SAFETY RULES
IMPORTANT SAFETY INSTRUCTIONS
CAUTION!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions detailed in this manual may
result in damage to the Microscope.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered and dark work areas invite
accidents.
SKU 54949 For technical questions, please call 1-800-444-3353 PAGE 2
2. Always wear eye protection. Wear ANSI approved safety impact eye
glasses when using this product.
PRODUCT USE AND CARE
1. Maintain the Microscope with care. Keep this product clean. A properly main-
tained tool is easier to use. Do not use damaged optical instruments. Tag
damaged instruments “Do not use” until repaired.
2. Check for misalignment or binding of moving parts, loose or broken parts,
and any other condition that may affect the Microscope’s operation.
If damaged, have the Microscope serviced before using.
3. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one product may become hazardous when used on another product.
4. The Microscope is a delicate, precise, optical instrument and should be
handled carefully and kept clean and dry to avoid damage. When not in
use, keep the Microscope covered with a dry, clean cloth. Dust and moisture
can damage the instrument.
5. Do not touch the optical parts of the Microscope with your fingers. Doing so
may damage the lenses.
6. If necessary, clean the lenses with a soft, dry brush. Do not clean with
moist cleaning agents.
7. Because the Microscope is a complex device, any repair and adjustments
should be performed only by a qualified service technician.
SERVICE
1. When servicing the Microscope, use only identical replacement parts.
Follow instructions in the
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of damage to the product.
“Inspection, Maintenance, And Cleaning”
section of this
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Microscope. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
SKU 54949 For technical questions, please call 1-800-444-3353 PAGE 3
Loading...