Harbor Freight Tools 52848 User Manual
AIR ANGLE DIE GRINDER
FRONT EXHAUST
Operating and Maintenance Instructions
Distributed exclusively by
Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2001 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
For technical questions please call 1-800-444-3353
SPECIFICATIONS
ITEM DESCRIPTION
Max. Air Pressure
Air Speed
Fitting Size
Collet Sizes
Accessories
90 PSI
20,000 RPM
1/4” NPT
1/4” 1/8”
11 mm Collet Wrench (Qty: 1)
17 mm Collet Wrench (Qty: 1)
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, operating and maintenance
procedures, parts lists and diagrams. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep this manual and invoice in a safe and dry place
for future reference.
SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle the Air
Angle Die Grinder.
3. STORE IDLE EQUIPMENT. When not in use, the Air Angle Die Grinder should be stored in
a dry location to inhibit rust. Always lock up the Air Angle Die Grinder and keep out of reach
of children.
4. DO NOT USE THE AIR TOOL KIT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or reflexes
are impaired while taking drugs. If there is any doubt, do not attempt to use this product.
5. USE EYE AND HEARING PROTECTION. Wear ANSI approved safety impact eye glasses
and ANSI approved hearing protection when working with the Air Angle Die Grinder. ANSI
approved safety impact eye glasses and hearing protection are available from Harbor
Freight Tools.
6. DRESS SAFELY. Non-skid footwear or safety shoes should be used when working with
this product. Do not wear loose clothing or jewelry as they can become caught in moving
parts. Wear a protective hair covering to prevent long hair from becoming caught in moving
parts. If wearing a long sleeve shirt, roll the sleeves up above the elbows.
7. DO NOT OVERREACH. Keep proper footing and balance at all times to prevent tripping,
falling, back injury, etcetera.
SKU 52848 PAGE 2
Loading...