Harbor Freight Tools 47844 Product manual

FOLDABLE WORKBENCH

Model

47844

ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

tained herein may be reproduced in any shape or form without the express written consent of Harbor Freight

Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual

product may differ slightly from the product described herein. Tools required for assembly and service may not

be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Revised Manual 10g

Speciﬁcations

Weight Capacity 260 lb. (dead weight)

Overall Dimensions

Table Adjustment Range 12-5/8” (outside to outside) and 3-3/4” (inside to inside)

Table Adjustment Width 9-3/8” (minimum)

Table Dimensions 23-7/8” (L) x 4-11/16” (W) x 3/4” (H)

Table Top Material Veneered Birch

Legs 28-1/4” (L) x 1” (sq.)

Weight 12.5 lb.

Features

25-1/8” (L) x 19-7/8” (W) x 30-7/8” (H) (with chocks) 29-7/8” (H) (without chocks)

Protractor Scale 24” ruler (also Metric) Foldable Vise

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tools with this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using tools with this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of ﬂammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords. Do not allow children to play with the Foldable Workbench.

4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5. Use the right tool for the job. When using tools with this product, do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this product and do not use it for a purpose for which it was not intended.

6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

Page 2SKU 47844

Rev 08a

7. Use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal ﬁlings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.

8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. Be careful of pinching ﬁngers when working with the Foldable Workbench.

9. Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times.

10. Disconnect power. Unplug tools when not in use.

11. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work surface before plugging it in.

12. Avoid unintentional starting. Be sure tool switches are in the Off position when not in use and before plugging in. Do not carry any tool with your ﬁnger on the trigger, whether it is plugged in or not.

13. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.

14. Take caution as some woods contain preservatives such as copper chromium arsenate (CCA) which can be toxic. When cutting these materials extra care should be taken to avoid inhalation and minimize skin contact.

15. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting ﬁxtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualiﬁed technician.

16. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges and refrigerator enclosures.

17. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.

18. Do not operate tools if under the inﬂuence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reﬂexes are impaired while taking drugs. If there is any doubt, do not operate the tool.

19. Maintenance. For your safety, service and maintenance should be performed regularly by a qualiﬁed technician.

20. Use proper size and type extension cord. If an extension cord is required, it must

Page 3SKU 47844

+ 4 hidden pages