Harbor Freight Tools 47791 Product manual
HOBBY AIR BRUSH KIT
47791
ASSEMBLY AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this
product. Failure to do so can result in
serious injury.
SAVE THIS MANUAL.
Copyright© 2002 by Harbor Freight Tools®. All rights
reserved. No portion of this manual or any artwork contained
herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Specifications
ITEM DESCRIPTION
Spray Pattern Adjustable: 1/4 to 2 inches
Air Brush Body Finger valve and adjustable spray
Nozzle Tip Fine, 0.03" (0.75 mm)
Hose Length 5 feet
Glas s Jar s 1-1/2 and 3/4 ounce with lids
Air Pump Adapters
1/4 inch, 18 NPT; one has air
adjustment flow control
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram.
Keep your invoice with this manual. Write the invoice number on the inside of
the front cover. Keep the manual and invoice in a safe and dry place for future
reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Don’t expose to rain. Keep work area
well lighted. Do not use the air compressor in the presence of flammable
gases or liquids. Do not smoke while spray painting.
3. Keep children away. Children must never be allowed in the work area.
Do not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
6. Maintain tools with care. Keep air brush clean for better and safer
performance. Follow instructions for lubricating and changing
accessories.
SKU 47791 Page 2
7. Do not overreach. Keep proper footing and balance at all times.
8. Use eye and nose protection. Always wear ANSI approved impact
safety goggles. While spraying, and working around chemical dusts and
mists, wear an ANSI approved dust mask or respirator.
9. Stay alert. Watch what you are doing, use common sense. Do not
operate any tool when you are tired.
10. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and
binding of moving parts; any broken parts or mounting fixtures; and
any other condition that may affect proper operation. Any part that
is damaged should be properly repaired or replaced by a qualified
technician.
11. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
12. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes
are impaired while taking drugs. If there is any doubt, do not operate the
tool.
13. Maintenance. For your safety, service and maintenance should be
performed regularly by a qualified technician.
14. The Hobby Air Brush Kit is only to be used for spraying paint. Never
spray gasoline, kerosene or any flammable solvent.
Warning: If paint is swallowed or inhaled, immediately contact a physician for
medical attention.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
SKU 47791 Page 3
Loading...