UNIVERSAL NiCd/NiMH
FAST BATTERY CHARGER
47618
SET UP AND OPERATING INSTRUCTIONS
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
Power Input 120 V~ / 60 Hz / 12 W
Power Output 400 mA
Battery Types NiCd & NiMH
Battery Sizes AAA, AA, C, D and 9V
Charging Capacity D, C, AA & AAA - Charge up to FOUR each.
Charging Time NiCd Cells: AAA, AA, C, D - 5 Hours
9V - Charge up to TWO each.
NiCd 9V, 110 mAh: 10 Hours*
NiMH Cells: AAA, AA, C - 8 Hours
NiMH D Cells - 16 Hours
NiMH 9V, 150-160 mAh: 15 Hours*
*This battery’s charge time needs to be monitored manually.
^
This battery needs more than one cycle to fully charge.
^
E183799
HOUSEHOLD USE ONLY
SAVE THIS MANUAL
You will need this manual for
the safety warnings and precautions,
assembly, operating, inspection,
maintenance and cleaning procedures,
parts list and assembly diagram. Keep
your invoice with this manual. Write the
invoice number on the inside of the front
cover. Write the product’s serial number in
the back of the manual near the assembly
diagram, or write month and year of
purchase if product has no number. Keep
this manual and invoice in a safe and dry
place for future reference.
IMPORTANT
SAFEGUARDS
READ AND UNDERSTAND
ALL INSTRUCTIONS
When using electrical
appliances, basic safety
precautions should always
be followed including the
following:
CAUTION: Risk of shock! Dry location 1.
use only.
Charge ONLY NiCd or NiMH type 2.
rechargeable batteries. Other types
of batteries may burst causing injury
and/or property damage.
Do not open housing. 3.
Do not overcharge batteries.4.
Do not charge NiCd or NiMH batteries 5.
at the same time.
Do not charge damaged batteries.6.
Follow all manual instructions.7.
SKU 47618 For technical questions, please call 1-800-444-3353. Page 2
Always wear ANSI-approved safety 8.
goggles during use.
SAVE THESE
Do not cover the vents of the Fast 9.
Battery Charger, place on a hard
surface.
Keep this Fast Battery Charger out of 10.
the reach of children.
Unplug the Charger from outlet when 11.
not in use.
Do not operate this Fast Battery Char-12.
ger with a damaged cord or plug or
after any malfunctions. Do not use if
it has been damaged in any manner.
Do not use outdoors.13.
Do not use this Fast Battery Charger 14.
for other than intended use.
This Fast Battery Charger has a po-15.
larized plug (one blade is wider than
the other). This plug will t in a polarized outlet only one way. To reduce
the risk of electric shock, this plug is
intended to t into a polarized outlet
only one way. If the plug does not t
fully in the outlet, reverse the plug. If
it still does not t, contact a qualied
electrician. Do not change the plug in
any way.
INSTRUCTIONS.
Power Cord Safety
A short power supply cord is to be 1.
provided to reduce risks resulting from
becoming entangled in or tripping
over a longer cord.
Longer extension cords are available 2.
and may be used if care is exercised
in their use. Follow all directions when
using a long extension cord.
If a long extension cord is used, 3.
the marked electrical rating of the a.
(detachable power supply cord or)
extension cord should be at least
as great as the electrical rating of
the appliance,
if the appliance is of the grounded b.
type, the extension cord should be
a grounding type 3-wire cord, and
the longer cord should be arranged c.
so that it will not drape over the
counter top or tabletop where it can
be pulled on by children or tripped
over.
Maintain labels and nameplates. 16.
These carry important information. If
unreadable or missing, contact Harbor
Freight Tools for a replacement.
The warnings, precautions, and 17.
instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may
occur. It must be understood by the
operator that common sense and caution are factors which cannot be built
into this product, but must be supplied
by the operator.
SKU 47618 For technical questions, please call 1-800-444-3353. Page 3
sure that the item is intact and undamaged. If any problem exists, please call
Harbor Freight Tools at the number shown
on the cover of this manual as soon as
possible.
UNPACKING
When unpacking, check to make
OPERATION
Place the Fast Battery Charger on 1.
a at, smooth, dry surface near an
electrical outlet.
Insert 1 to 4, D, C, AA, AAA batteries, 2.
or 1 to 2 9V batteries in the Battery
Compartment. DO NOT MIX NiCd
(NICKEL-CADMIUM) AND NiMH
(NICKEL-METAL HYDRIDE) BATTERIES.
3. Slide the Battery Type Switch to
select the correct type of battery. For
Nickel-Cadmium batteries, set the
Battery Type Switch to the NiCd position. For Nickel-Metal Hydride batteries, set the Battery Type Switch to the
NiMH position. See illustration.
Plug the Charger into a correct house-4.
hold electric outlet. The LED (CH 1,
CH 2, CH 3 or CH 4) will glow red color to indicate the proper charging. After the proper charge time is reached
(5 hours for NiCd and 8 hours for
NiMH, except for 9V of both types,
and NiMH D Cells), the red lights will
turn off and the trickle charge is on.
TROUBLESHOOTING
The charged batteries are now ready
for use. See illustration.
Unplug the Fast Battery Charger and 5.
remove all batteries when not in use.
Note: When 9V batteries are placed in
the Charger the green light at the top
of the Charger will come on. After
10 Hours for NiCd (110 mAh) and
15 hours for NiMH (150-160 mAh),
remove the 9V batteries from the
Charger. The 9V batteries are now
ready for use.
Note: The charging of 9V batteries is by
manual control. You must observe the
charging time. Periodically check the
condition of the charger and batteries. Do not over charge the batteries.
The green light will stay on until you
remove the 9V batteries from the Battery Compartment.
Note: Unplug and then re-plug the Fast
Battery Charger each time you recharge the empty batteries, to reset
the charger.
Record Product’s Serial Number
Here:
Note: If product has no serial number,
record month and year of purchase
instead.
Note: Replacement parts are not avail-
able for this product.
Problem Possible Solution
The Charge Indicator Light(s) do
not illuminate when battery(ies) are
inserted.
The Fast Battery Charger and/or the
batteries feel warm to the touch.
Make sure the Power Cord/Plug of the Fast Battery 1.
Charger is plugged into a working 120 Volt, grounded,
electrical outlet.
Disconnect the Power Cord/Plug from its electrical outlet. 2.
Check to make sure each battery is inserted properly into
the Battery Compartment.
This is normal and should not be cause for concern.
SKU 47618 For technical questions, please call 1-800-444-3353. Page 4
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet
high quality and durability standards, and warrants to the original purchaser that this
product is free from defects in materials and workmanship for the period of 90 days
from the date of purchase. This warranty does not apply to damage due directly or
indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of
maintenance. We shall in no event be liable for death, injuries to persons or property,
or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS
WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation of the
complaint must accompany the merchandise. If our inspection veries the defect, we
will either repair or replace the product at our election or we may elect to refund the
purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that
the defect resulted from causes not within the scope of our warranty, then you must
bear the cost of returning the product.
This warranty gives you specic legal rights and you may also have other rights
which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
SKU 47618 For technical questions, please call 1-800-444-3353. Page 5
REV 08k
Loading...