Harbor Freight Tools 47418 User Manual
SERVICE CART
WITH T OOL CHEST
47418
ASSEMBLY INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our W eb site at http://www.harborfreight.com
Copyright © 2004 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Specifications
Service Cart with 2 Drawer Tool Chest
Tool Cart Overall Dimensions
Tool Chest Drawer Dimensions
Maximum Weight for Drawers
Maximum Weight for Tool Tray
Finish
Casters
30”W X 16-1/8”D X 36”H
Top Drawer-22-3/8” X 14-3/8” X 2-3/8”
Bottom Drawer-22-3/8” X 14-3/8” X 3-1/2”
66 Lbs. each
220 Lbs.
Red Powder Coat Sheet Metal w/Chrome Plated Steel Frames
4 Swivel Wheels-2 w/Locks-Black Rubber/Chrome
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. K eep
your inv oice with this manual. Write the inv oice number on the inside of the front
cover. K eep the man ual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Keep work area clean. Cluttered areas invite injuries.
2. Keep children away. Children must never be allowed in the work area. Do
not let children play with this product.
3. Store idle equipment. When not in use, this product must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
4. Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically nonconductive clothes and nonskid
footwear are recommended when working.
5. Use eye and ear protection. Always wear ANSI approved impact safety
goggles when working around tools.
6. Do not overreach. Keep proper footing and balance at all times. Never sit
on, or use the Service Car t as a ladder type device for climbing.
7. Use the right product for the job. Do not attempt to force a small product
or attachment to do the work of a larger industrial product. There are cer tain
applications for which this product was designed. Do not modify this product
and do not use this product for a purpose for which it was not intended.
8. Stay alert. Watch what you are doing, use common sense. Do not assemble
this product when you are tired.
SKU 47418 Page 2
Loading...