Harbor Freight Tools 47337 Owner's Manual
CARPET INSTALLER
(KNEE KICKER)
47337
OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2003 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.
REVISED MANUAL 06d, 09i
Specifications
Maximum Length 21-1/2”
Minimum Length 18-1/2”
Head Dimensions 4-7/8”L x 5-1/8”W
Maximum Pin Extension 3/8”
Adjustment Holes 4, in 1” increments
Save This Manual
You will need the manual for the safety warnings and precautions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the
invoice number on the inside of the front cover. Keep the manual and invoice in a safe and
dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use tools in damp or wet locations. Don’t
expose to rain. Keep work area well lighted.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle the Carpet Installer.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this
tool was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it was
not intended. Improper use of the tool can result in carpet damage and personal injury.
If there is any question on how to use this tool properly, enlist the help of an experienced
professional. This tool is not intended for carpet stretching.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught while
working. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
7. Use eye protection. Always wear ANSI approved impact safety goggles.
8. Maintain tools with care. Keep tools sharp and clean for better and safer
performance. Follow instructions for changing accessories.
9. Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
SKU
47337
Page 2
Loading...