Harbor Freight Tools 47082 User Manual 2
ELECTRIC CLIPPER
Model
47082
SET UP AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
Construction
Accessories
Electrical Input 120 V~, 60 Hz, 8-13 W
High impact plastic housing,
High Carbon steel cutting blade
Comb Attachment (w/ 4 Settings)
Barber Comb
Cleaning Brush
Scissors
Lubricant (One Tube)
E316219
Save This Manual
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Write the product’s serial number in the back of the manual near
the assembly diagram, or write month and year of purchase if product has no number.
Keep this manual and invoice in a safe and dry place for future reference.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions
should always be followed, including the following:
Read all instructions before using.
SAVE THESE INSTRUCTIONS
DANGER - TO REDUCE THE RISK OF ELECTRIC SHOCK:
Do not reach for an appliance that has fallen into water. 1. Unplug immediately.
Do not use while bathing or showering.2.
Do not place or store appliance where it can fall, or be pulled, into a tub or 3.
sink. Do not place in or drop in water or other liquid.
Unplug this appliance before cleaning.4.
WARNING - TO REDUCE THE RISK OF BURNS, ELECTRIC
SHOCK, OR INJURY TO PERSONS:
This appliance should never be left unattended when plugged in.1.
Close supervision is necessary when this appliance is used on, by, or near 2.
children or invalids.
Use this appliance only for it’s intended use as described in this manual. 3. Do
not use attachments not recommended by the manufacturer.
For technical questions, please call 1-800-444-3353.
Page 2SKU 47082
Never operate this appliance if it has a damaged cord or plug, if it is not 4.
working properly, if it has been dropped or damaged, or dropped into water.
Return the appliance to a service center for examination and repair.
Keep the cord away from heated surfaces.5.
Never operate the appliance with the air openings blocked or while on a soft 6.
surface, such as a bed or couch, where the air openings may be blocked.
Keep the air openings free of lint, hair, and the like.
Never drop or insert any object into any opening.7.
Do not use outdoors or operate where aerosol (spray) products are being 8.
used or where oxygen is being administered.
Do not use this appliance with a damaged or broken comb, as facial injury 9.
may occur.
To reduce the risk of electric shock, the Clipper is equipped with a polarized 10.
plug (one blade is wider than the other). This plug will only t into the polarized
outlet one way. In the event the plug does not t fully into the outlet, reverse
the plug. If the plug still will not t the outlet, have a proper outlet installed by a
qualied electrician. Do not change the plug in any way.
General Safety Rules
Do not abuse the Power Cord. 1. Never use the Power Cord to carry the clippers
or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp
edges, or moving parts. Replace damaged Power Cords immediately. Damaged
Power Cords increase the risk of electric shock.
Stay alert. 2. Do not use while tired or under the inuence of drugs, alcohol, or
medication. A moment of inattention while operating this appliance can result in
serious personal injury.
Avoid accidental starting. 3. Be sure the Power Switch is off before plugging in.
Disconnect the Power Cord Plug from the power source before making any 4.
adjustments, changing accessories, or storing the clipper. Such preventive
safety measures reduce the risk of starting the clipper accidentally. Always unplug
the clipper from its electrical outlet before performing any inspection, maintenance,
or cleaning procedures.
Store idle clippers out of reach of children and other untrained persons. 5.
Clippers are dangerous in the hands of untrained users.
This product is intended for household use only.6.
Maintain labels and nameplates on the clipper. 7. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
For technical questions, please call 1-800-444-3353.
Page 3SKU 47082
Loading...