Harbor Freight Tools 46862 User Manual
®
Steel Bi-fold
®
Ramp
46862
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2002 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Specifications
Open Dimensions 43-1/16” W x 69-3/4” L x 1-11/16” H
Folded Dimensions 21-5/16” W x 69-3/4” L x 2-7/8” H
Tongue Dimensions 1” W x 3-3/4” x 3/16” L (15° angle)
Rung Width 19-1/4” W
Note: Maximum Load Capacity = 1,250 Lb. Do not exceed this maximum.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this product, basic safety precautions should always
be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
Avoid working alone. If an accident happens, an assistant can bring help.
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Keep work area well lighted.
3.
Keep children away. Children and pets must never be allowed in the area when you are
4.
loading or unloading a vehicle with the Ramp. Do not let them climb or walk on Ramp.
Store idle equipment. When not in use, the Ramp must be stored in a dry location to
5.
inhibit rust. Always lock up Ramp and keep out of reach of children.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving
6.
parts. Protective, electrically non-conductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair. Protect your
hands with heavy duty work gloves.
Use eye protection. Always wear ANSI-approved impact safety goggles.
7.
Do not overreach. Keep proper footing and balance at all times.
8.
Maintain Ramp with care. Inspect Ramp periodically, and if damaged, have it repaired
9.
by an authorized technician.
Use the right Ramp for the job. Do not attempt to force a small Ramp to do the work
10.
of a larger industrial Ramp. There are certain applications for which this Ramp was
designed. Do not modify this Ramp and do not use this product for a purpose for which
it was not intended.
Stay alert. Watch what you are doing, use common sense. Do not set up and use the
11.
Ramp when you are tired.
SKU 46862 For technical questions, please call 1-800-444-3353. Page 2
Check for damaged parts. Before using any tool, any part that appears damaged
12.
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts or
mounting fixtures; and any other condition that may affect proper operation. Note: Dents
or other imperfections in the Ramp may lead to a weakening of the structural strength of
this product; do not use the ramp if this type of damage is noted.
Replacement parts and accessories. When servicing, use only identical replacement
13.
parts. Use of any other parts will void the warranty.
Do not use this product if under the influence of alcohol or drugs. Read warning
14.
labels on prescriptions to determine if your judgment or reflexes are impaired while taking
drugs. If there is any doubt, do not use the Ramp.
Maintenance. For your safety, maintenance should be performed regularly by a quali-
15.
fied technician.
Ground contact. Use your Ramps on a solid, level, flat, dry surface. Make sure the
16.
Tongue edge fully contacts the tailgate of the vehicle.
17. Clean Ramps. Prior to each use, clean dirt, oil, or any debris off ramps.
17.
Load vehicle slowly. Never ride a vehicle down the load ramp.
18.
Never exceed the 1250 Lb. Maximum, including people pushing the load. Doing so
19.
can result in personal injury and/or damage to the ramp. Be aware of dynamic loading!
If you drop a load on the ramp or if the load bounces, it may create, for a brief instant, an
excess load which may result in damage to the ramp and/or personal injury.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
Unpacking
When unpacking, check to make sure the parts listed at the end of this manual are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number on the cover of this manual.
SKU 46862 For technical questions, please call 1-800-444-3353. Page 3
Loading...