Harbor Freight Tools 46319 User Manual

PNEUMATIC ROLLER SEAT

46319

ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Copyright© 2001 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools. Diagrams within this
manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Revised 04l, 09h

Specifications

ITEM DESCRIPTION

Overall Dimensions 19-1/6”H x 15-1/4” Dia.

Tool Tray 15-1/4” Dia. x 7/8” D x 9/100” Thick

Lifting Plate 1-31/32” Dia. x 7” to 11-5/8”H

Ram Extension 2” Dia. x 7-3/4”H

Handle 5-1/2”L x 1-1/4”W x 5/16” Thick

Hub 1-5/64” I.D. x 1-5/8” H

Supporting Plate 6”L x 5-7/8”W

Casters 2-13/32” Dia. x 3/4”W

Seat 11-1/2” Dia. x 1-5/8” Thick

Material Stamped Steel, Red Vinyl, Foam Rubber

Net Weight 12.35 Lbs.

Weight Capacity 300 Lbs.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Keep children away. Children should not be allowed in the work area. This
product is not intended for children.

3. Use the right product for the job. There are certain applications for which
this product was designed. Do not modify this product and do not use this
product for a purpose for which it was not intended.

4. Use eye protection. Always wear ANSI approved impact safety goggles.

5. Maintain product with care. Inspect parts periodically and, if damaged,
have them repaired by an authorized technician.

6. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.

SKU 46319 Page 2